Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 37

Thread: Yeehaaa! Port Waikato

  1. #16
    Join Date
    24th May 2008 - 21:24
    Bike
    some honda bits in a kx chassis
    Location
    Waiuku City
    Posts
    1,326
    Quote Originally Posted by oldskool View Post
    Oh that's not fair, you know I would never bail unless I had a good reason! It's just I did promise Tawny I'd take her riding and since there is no-one to look after her on the kids track while I am out riding it would be damn irresponsible for me to leave her alone while I go out and enjoy myself
    lol, ok sorry mate
    i was only giving the short version, so ill correct myself

    oldskool can not come because someone else bailed on him and they were in part going to look after the kiddies, and because hes such a good father he doesnt break promises and has to take his little girl for a ride, probably the sandpit

    better?? lol
    we may just go where no ones been

  2. #17
    Join Date
    17th August 2005 - 11:00
    Bike
    22"Z900rsSE, Z1R, FZR1000, KTM 2 smoker
    Location
    East Auckland
    Posts
    4,480
    We run about 11-14psi usually! Nice bike mate! What do you think of the Scorpion extra for winter?? You must like them if you've had 5 or more! Went in to buy one and walked out with a Mt32 instead thats on the 03 Ktm, not to bad a tyre actually. The s12 that was on the 08 Ktm when I bought it is knackered now so might go for the Extra.

    Btw they wouldn't give you a new tyre free, if they thought it was all your fault re wrong tyre pressure! It was probably faulty and they where using that as a bit of a bullshit excuse! Lots of people put heavy duty tubes in and run that sorta pressure I think!

    BTW 2: Saw Karl Power change a tyre at one of the GNCC events and he had a big spongy rubber thingy in it! $500 each I think he said but no air required and no punctures ever!
    On a Motorcycle you're penetrating distance, right along with the machine!! In a car you're just a spectator, the windshields like a TV!!

    'Life's Journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out! Shouting, ' Holy sh!t... What a Ride!! '

  3. #18
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339
    Quote Originally Posted by Reckless View Post
    We run about 11-14psi usually! Nice bike mate! What do you think of the Scorpion extra for winter?? You must like them if you've had 5 or more! Went in to buy one and walked out with a Mt32 instead thats on the 03 Ktm, not to bad a tyre actually. The s12 that was on the 08 Ktm when I bought it is knackered now so might go for the Extra.

    Btw they wouldn't give you a new tyre free, if they thought it was all your fault re wrong tyre pressure! It was probably faulty and they where using that as a bit of a bullshit excuse! Lots of people put heavy duty tubes in and run that sorta pressure I think!

    BTW 2: Saw Karl Power change a tyre at one of the GNCC events and he had a big spongy rubber thingy in it! $500 each I think he said but no air required and no punctures ever!

    yea they are called moose tubes i think, id say birchy and all the other extreme enduro guys use them. i think they replicate 13 psi, drill holes in them and they get softer. the scorpion extra is a good all rounder i reckon, i had a s12 once, it only lasted 4 rides and it was puckaroo.
    SHE LOOKED UP AT ME WITH BLOOD IN HER EYES
    THEN HER SKIN FELL OFF
    AND SHE PROMPTLY DIED
    IT WAS EBOLA, LA LA LA EBOLA

  4. #19
    Join Date
    14th January 2006 - 23:37
    Bike
    04 Buell XB12R 06 WR250F
    Location
    Manukau City/Wiri
    Posts
    2,479
    Quote Originally Posted by oldskool View Post
    Oh that's not fair, you know I would never bail unless I had a good reason! It's just I did promise Tawny I'd take her riding and since there is no-one to look after her on the kids track while I am out riding it would be damn irresponsible for me to leave her alone while I go out and enjoy myself

    Besides I know this might sound stupid to all you bike mechanic pro's but I just can't seem to slip the collar deep enough into the oil seal so I can fit the front sprocket on properly...the sprocket doesn't go in enough to allow the circlip to bed into the groove?
    have you tryed turning the sprocket around, i don't mean around, I mean around, haha
    Why would you ride that long and that gnarly stuff if you don't have to, Its what we do, we love it.
    Nathan Woods R.I.P.

  5. #20
    Join Date
    24th August 2008 - 16:26
    Bike
    09crf250r
    Location
    auckland
    Posts
    580
    Quote Originally Posted by oldskool View Post
    Oh that's not fair, you know I would never bail unless I had a good reason! It's just I did promise Tawny I'd take her riding and since there is no-one to look after her on the kids track while I am out riding it would be damn irresponsible for me to leave her alone while I go out and enjoy myself

    Besides I know this might sound stupid to all you bike mechanic pro's but I just can't seem to slip the collar deep enough into the oil seal so I can fit the front sprocket on properly...the sprocket doesn't go in enough to allow the circlip to bed into the groove?
    had my back tube out for the third time in 24/hours keep stabbing the tyre leaver in one side and out the other f it new tube tomorrow

  6. #21
    Join Date
    9th May 2007 - 16:10
    Bike
    . .
    Location
    Here
    Posts
    4,513
    Sunset farm is an awesome place to ride. I have done a couple of two man cross country races there in the dim dark past. One time on a RMX250 and another on a 94 KLX250. The clay can get a little slippy when wet but be committed and you'll get up the hills easily Show no fear!! I might even try to make this ride as it's just down the road.
    Andy.

  7. #22
    Join Date
    6th October 2008 - 13:36
    Bike
    Freeride 250, BETA XT300
    Location
    Auckland
    Posts
    1,418
    Quote Originally Posted by oldguy View Post
    have you tryed turning the sprocket around, i don't mean around, I mean around, haha
    you mean round and round like a record? or spin me around like a gogo?

  8. #23
    Join Date
    14th January 2006 - 23:37
    Bike
    04 Buell XB12R 06 WR250F
    Location
    Manukau City/Wiri
    Posts
    2,479
    Quote Originally Posted by oldskool View Post
    you mean round and round like a record? or spin me around like a gogo?
    Now I,m haha sometimes if you flip the sprocket round the clip will just drop into place, I have been known to talk shit thou.
    Why would you ride that long and that gnarly stuff if you don't have to, Its what we do, we love it.
    Nathan Woods R.I.P.

  9. #24
    Join Date
    6th October 2008 - 13:36
    Bike
    Freeride 250, BETA XT300
    Location
    Auckland
    Posts
    1,418
    Quote Originally Posted by oldguy View Post
    Now I,m haha sometimes if you flip the sprocket round the clip will just drop into place, I have been known to talk shit thou.
    No, you talk shit? I would have never imagined.
    No the sprocket is identical both sides and is identical in thickness to the original sprocket I replaced last month. So I would hazard a guess that the collar needs to somehow slip inside the seal more but I can't get it under the lip (inside edge of seal) without the fear of damaging it.

  10. #25
    Join Date
    24th May 2008 - 21:24
    Bike
    some honda bits in a kx chassis
    Location
    Waiuku City
    Posts
    1,326
    im now ready, bikes all back together, looks heaps better now

    so whos going jt119, flyinktm, xen, me, IIIRII, anthrax?
    its gonna be awesome, apparently you need to look out for cliffs...
    we may just go where no ones been

  11. #26
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339
    Quote Originally Posted by noobi View Post
    im now ready, bikes all back together, looks heaps better now

    so whos going jt119, flyinktm, xen, me, IIIRII, anthrax?
    its gonna be awesome, apparently you need to look out for cliffs...
    ill be there, i dont care if its raing bricks im still going.

    ill be out riding tommorrow too, probbably kimmys or thunder
    SHE LOOKED UP AT ME WITH BLOOD IN HER EYES
    THEN HER SKIN FELL OFF
    AND SHE PROMPTLY DIED
    IT WAS EBOLA, LA LA LA EBOLA

  12. #27
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339
    i suppose i should get my bike ready for tommorrow
    SHE LOOKED UP AT ME WITH BLOOD IN HER EYES
    THEN HER SKIN FELL OFF
    AND SHE PROMPTLY DIED
    IT WAS EBOLA, LA LA LA EBOLA

  13. #28
    Join Date
    24th May 2008 - 21:24
    Bike
    some honda bits in a kx chassis
    Location
    Waiuku City
    Posts
    1,326
    Quote Originally Posted by flyingcr250 View Post
    i suppose i should get my bike ready for tommorrow
    what like put the wheel back on?
    i finished putting my bike back together today, looks most betterer now lol

    see you tomorrow
    we may just go where no ones been

  14. #29
    Join Date
    12th September 2008 - 17:56
    Bike
    09 KTM 250 Exc
    Location
    Waiuku City
    Posts
    270
    :P to oldsckool, u missed another really good ride.
    Did 7 laps ,only fell off once

  15. #30
    Join Date
    2nd September 2008 - 22:18
    Bike
    Changes Weekly
    Location
    NGARUAWAHIA
    Posts
    2,339
    yea wasnt a bad ride, not worth the $40 in my mind. had good views of the sea and a couple of challenging parts, just the same old for farm rides. ROLL ON BERM BUSTER IN TAUPO
    SHE LOOKED UP AT ME WITH BLOOD IN HER EYES
    THEN HER SKIN FELL OFF
    AND SHE PROMPTLY DIED
    IT WAS EBOLA, LA LA LA EBOLA

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •