Results 1 to 11 of 11

Thread: New starter motor?

  1. #1
    Join Date
    2nd March 2009 - 19:20
    Bike
    2006 HD FXDC
    Location
    Christchurch
    Posts
    826
    Blog Entries
    10

    New starter motor?

    Just went out to jump on the bike - and nothing. Does this now and again. Press the starter and nothing. Not the battery. Will start if i crash it and then might be fine for another 50 starts before it does it again. Do I need a new starter motor?

  2. #2
    Join Date
    6th April 2008 - 15:43
    Bike
    1980 Suzuki GS1000 and 1983 Suzuki GR650
    Location
    Napier
    Posts
    401
    Check conections for start button,
    Boys can't ride broken toys.

  3. #3
    Join Date
    4th January 2004 - 20:25
    Bike
    08 Victory Vegas
    Location
    Glenavy
    Posts
    1,668
    Sounds like you have a dead spot in the starter.
    Take it off and get it checked.
    If you are lucky it could be brushes.
    Feel the fear and do it anyway

    Don't confuse education with intelligence.
    There are alot of highly educated idiots out there.

  4. #4
    Join Date
    2nd March 2009 - 19:20
    Bike
    2006 HD FXDC
    Location
    Christchurch
    Posts
    826
    Blog Entries
    10
    Quote Originally Posted by lemans View Post
    Sounds like you have a dead spot in the starter.
    Take it off and get it checked.
    If you are likely it could be brushes.
    Yep, that's what I thought. But can it be repaired or will I be looking at a new starter motor??

  5. #5
    Join Date
    4th January 2004 - 20:25
    Bike
    08 Victory Vegas
    Location
    Glenavy
    Posts
    1,668
    Quote Originally Posted by rosie631 View Post
    Yep, that's what I thought. But can it be repaired or will I be looking at a new starter motor??
    Not sure as they can be re-wound, but sometimes it is cheaper and easier to buy a new one.

    It could all so be a sticky solenoid.
    If you know where it is, give it a good firm smack with a lump of wood. (don't break anything)
    All so check that the wiring it good and connectors are tight.
    Feel the fear and do it anyway

    Don't confuse education with intelligence.
    There are alot of highly educated idiots out there.

  6. #6
    Join Date
    2nd March 2009 - 19:20
    Bike
    2006 HD FXDC
    Location
    Christchurch
    Posts
    826
    Blog Entries
    10
    Quote Originally Posted by lemans View Post

    It could all so be a sticky solenoid.
    If you know where it is, give it a good firm smack with a lump of wood. (don't break anything)
    That could be worth a try. used to have to do that with my old car. At least it may get me mobile. Should have got problem sorted ages ago but because it so rarely does it have just relied on there being someone around to give me a push to crash it. BUGGER

  7. #7
    Join Date
    1st September 2007 - 21:01
    Bike
    1993 Yamaha FJ 1200
    Location
    Paradise
    Posts
    14,125
    Blog Entries
    2
    An Auto electrician will be able to tell you, in a short space of time. lemans is correct, sometimes happens. The warning signs are often ignored, better it did this at home.... not in the middle of nowhere... on a holiday weekend... out of cell coverage.... with nobody else around...
    When life throws you a curve ... Lean into it ...

  8. #8
    Join Date
    2nd March 2009 - 19:20
    Bike
    2006 HD FXDC
    Location
    Christchurch
    Posts
    826
    Blog Entries
    10
    Quote Originally Posted by FJRider View Post
    An Auto electrician will be able to tell you, in a short space of time. lemans is correct, sometimes happens. The warning signs are often ignored, better it did this at home.... not in the middle of nowhere... on a holiday weekend... out of cell coverage.... with nobody else around...
    Yes, that's true. Could be worse.

  9. #9
    Join Date
    26th February 2005 - 15:10
    Bike
    Ubrfarter V Klunkn,ffwabbit,Petal,phoebe
    Location
    In the cave of Adullam
    Posts
    13,624
    Intermittent, odds are it's probably just brushes. A few bucks for new ones (try your local autosparky for generic ones the right size, a fraction of OEM prices often); and a few hours labour.

    Only pulling it down will tell though.
    Quote Originally Posted by skidmark
    This world has lost it's drive, everybody just wants to fit in the be the norm as it were.
    Quote Originally Posted by Phil Vincent
    The manufacturers go to a lot of trouble to find out what the average rider prefers, because the maker who guesses closest to the average preference gets the largest sales. But the average rider is mainly interested in silly (as opposed to useful) “goodies” to try to kid the public that he is riding a racer

  10. #10
    Join Date
    9th February 2007 - 09:26
    Bike
    An old one, some new one's !
    Location
    hawera, Taranaki
    Posts
    302
    Loose connections are common with harley starters !!

  11. #11
    Join Date
    3rd September 2008 - 14:50
    Bike
    Any
    Location
    NZ
    Posts
    135
    Check the starter button first, then make sure the starter solenoid is good, then the the wiring and connections then the starter motor.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •