Team GPR

[mr bucketracer]

It was a pretty good flame up, pity I had no marshmallows.lol........

[mr bucketracer]

I was going to suggest you bring it up two hour weekend for the race on Saturday but it sounds like you have cremated it.we got it fixed again but after a staple has gone through the newish tire and know the kart boys only sell twos we hve given up ,u never know kart guys my have somthing for me this weekend

[jasonu]

I still have my pump up canister horn. Used it a few times in Auckland 2hrs back in the day. Hilarious.

Was it a 'non competition' horn?

[speedpro]

There's bound to be something round and black that will fit lying about somewhere. It is a kart track after all. My mate Kev may even have something he wouldn't mind parting with.

[mr bucketracer]

team gpr should have a go of betting these old people (-: lol now who has that model t
https://www.youtube.com/watch?v=G1rQFQDAWPU

[seymour14]

team gpr should have a go of betting these old people (-: lol now who has that model t
https://www.youtube.com/watch?v=G1rQFQDAWPU

We swapped it for a 1927 Indian remember. I tried to see myself in that video because we were there that day as part of the Classic Motorcycle Club, spotted our club president but that was it.

We couldn't build a Model T in 40 years, that must be a record as well I would think...:rolleyes:

[wildman]

we got it fixed again but after a staple has gone through the newish tire and know the kart boys only sell twos we hve given up ,u never know kart guys my have somthing for me this weekend

Bring the sidecar up , i'll be at track on saturday and have a selection of kart tyres and tubes and different rims as well

[Henk]

Bring the sidecar up , i'll be at track on saturday and have a selection of kart tyres and tubes and different rims as well

I think they may have set it on fire. Made any progress with Pumba's rig?

[F5 Dave]

That fire thing sounds worth a shot.

[wildman]

I think they may have set it on fire. Made any progress with Pumba's rig?

Have welded up a front end back on it and lightened it a bit. But time and money lately is going into getting Agip sidecar rebuilt for Paeroa in Feb. May have Battle Truck ready for GP in March

[seymour14]

Hopefully Scott will take the chair up, like he said, we ran it with the mini motos and it got an "R Clip" through the back tyre making it a bit obsolete... If there was a replacement tyre lying about, I'm sure that would tempt him.

That same day Regan's V4 got a motorcycle connecting chain link half go through his back tyre, made the day a little more expensive then it otherwise could have been.

Having learnt the power of "spare parts" falling off bikes, I will be bringing a bucket of said parts with me and liberally giving them out like Santa Claus whilst riding.:whistle:

[TALLIS]

Right, since the ese thread is going into hyper seriousness, I thought I might explain myself here. As the only people that I care that see the explanation would see it here, or other threads in the bucket racing section of this forum. There's no denying that certain people have a lot of two stroke knowledge in general, and boy are they right! (110% or the time!) But all this constant Babel about kart engines, rygers, etc etc. All the questions from Germany, Belgium and how else fucken knows... I thought the point of it was to help develop 50 - 125 chicken moving two stroke engines into competitive road racing engines. It has just gone so far away from what it is intended (in my opinion, if i am allowed to have one?)

[TALLIS]

http://www.apriliaforum.com/forums/archive/index.php/t-258927.html
Abit of Sunday morning reading about someone

[mr bucketracer]

Right, since the ese thread is going into hyper seriousness, I thought I might explain myself here. As the only people that I care that see the explanation would see it here, or other threads in the bucket racing section of this forum. There's no denying that certain people have a lot of two stroke knowledge in general, and boy are they right! (110% or the time!) But all this constant Babel about kart engines, rygers, etc etc. All the questions from Germany, Belgium and how else fucken knows... I thought the point of it was to help develop 50 - 125 chicken moving two stroke engines into competitive road racing engines. It has just gone so far away from what it is intended (in my opinion, if i am allowed to have one?)i agree but as you see back in the thread it was new zealand guys talking about there bucket 2 strokes and good avice from rob , ideas kicked around ...robs build witch cant get a word in each way now ,and a bit of fun. But now bring up removing vibs from a 2 stroke they turn into angree little men ,and we know who you are! Holy crap lol and f5 dave pepping tom looking through the window watching us drink lol

[Bert]

All the crap aside, the satalite sidecar team made some progress today.

317278

[husaberg]

All the crap aside, the satalite sidecar team made some progress today.]

All i'm going to say is it looks nothing like sputnik.
317280317281

It still looks Very GPR though.

[Henk]

All the crap aside, the satalite sidecar team made some progress today.

317278

Is the factory sidecar team coming up for the two hour? Looks like we have at least five entries.

If you make it up grab me for a yitter on sat afternoon, I'll probably forget

[seymour14]

Is the factory sidecar team coming up for the two hour? Looks like we have at least five entries.

If you make it up grab me for a yitter on sat afternoon, I'll probably forget

I think they are hoping to, Scott will need to give you the last word on that. And pretty sure he will need another rear tyre.

Cheers.

[jasonu]

All the crap aside, the satalite sidecar team made some progress today.

317278

You ill be doing test laps tomorrow morning...:niceone:

[mr bucketracer]

You ill be doing test laps tomorrow morning...:niceone:a all nighter you think:yes:bert lolo

[mr bucketracer]

317296the 300 is getting there thanks to richerd and glen helping out , nick keeping me positive, i have to say tyga have a nice cyiinder

[steamroller]

http://www.apriliaforum.com/forums/archive/index.php/t-258927.html
Abit of Sunday morning reading about someone

That's so funny the man

[husaberg]

317296the 300 is getting there thanks to richerd and glen helping out , nick keeping me positive, i have to say tyga have a nice cyiinder

Have you done a frame in British racing green yet Scott?

[mr bucketracer]

Have you done a frame in British racing green yet Scott?no but yes that would look cool

[chrisc]

That 300 is going to be a handful, yikes

[Bert]

a all nighter you think:yes:bert lolo

Nope no all nighter... But have nearly everything now to sort out the rolling elements (hubs etc).
Can you have a look for a 20mm steel shaft that can be used for axles?

[mr bucketracer]

Nope no all nighter... But have nearly everything now to sort out the rolling elements (hubs etc).
Can you have a look for a 20mm steel shaft that can be used for axles?Apparently not part of GPR anymore... must answer phone

[jasonu]

317296the 300 is getting there thanks to richerd and glen helping out , nick keeping me positive, i have to say tyga have a nice cyiinder

Single front disk on a 300 might be iffy...

[richban]

Single front disk on a 300 might be iffy...

Should be sweet with the weight of the bike. Not sure about the rider. We had a little weigh in at the track the other day. No numbers will be quoted.:msn-wink:

[TALLIS]

Should be sweet with the weight of the bike. Not sure about the rider. We had a little weigh in at the track the other day. No numbers will be quoted.:msn-wink:
I think Scott only just beat me at the weigh in as heavy weight champ. Brake should be fine, only a few more kg in the bike over the buckets, and only a tad more straight line speed expected :rolleyes:

Here's something to get you worried rich

[Bert]

Apparently not part of GPR anymore... must answer phone

Working mate... Sucks but pays the bills:weep:

Answer what phone?? your number doesn't seem to show up lately...

[richban]

Here's something to get you worried rich

No not worried yet! Good to see another bike on the build though.

[TALLIS]

Answer what phone?? your number doesn't seem to show up lately...
Have you been seeing another engineer behind Scottys back!? Lol
I can't wait to see what that little Yamaha power plant goes like! Good to see the jigsaw coming together

[Bert]

All the crap aside, the satalite sidecar team made some progress today.

317278

So ~60% finished...:sleep:
Now just need final axle solution and bearing mounts.
Mk1 will have a solid front end until I can twist Dr CNC Griff to make something cool...
Rear wheel will be fixed with the engine on adjusters :lol:

About 9kgs currently.

[husaberg]

no but yes that would look cool

Another colour is Ford Ludlow Green Your old man might recognise what very famous bikes it was used on (other than Fords and Bantams)
If you google it it should show/tell you.

[Bert]

Have you been seeing another engineer behind Scottys back!? Lol
I can't wait to see what that little Yamaha power plant goes like! Good to see the jigsaw coming together

Yea all 14hp....
No, no extra engineer... Just lads having time out.

[mr bucketracer]

Working mate... Sucks but pays the bills:weep:

Answer what phone?? your number doesn't seem to show up lately...regan rung to see if you were going to the meeting but he said no answer ,

[mr bucketracer]

Have you been seeing another engineer behind Scottys back!? Lol
I can't wait to see what that little Yamaha power plant goes like! Good to see the jigsaw coming togetherim so sad now , messing around with another man :blink:



bert hates me

[steamroller]

regan rung to see if you were going to the meeting but he said no answer ,

I rung to see if he would take the t2 smoker out for the day

[steamroller]

just got 5 meters of brake line bet that blows your mind

[mr bucketracer]

I rung to see if he would take the t2 smoker out for the dayto much power , well at least a good bike talk up lol

[mr bucketracer]

just got 5 meters of brake line bet that blows your mindholy cow , that must be a world record:laugh:

[steamroller]

Big day today bike is running up real nice . Would like to thank all gpr boys for this build really nice work now get me 30 hp plus:yes:

tallis whats missing from this photo for the weekend boy

[steamroller]

tallis whats missing from this photo for the weekend boy

y can i not put a photo up need more beer

[mr bucketracer]

tallis whats missing from this photo for the weekend boyneed a photo to have something missing in the first place:rolleyes:

[TALLIS]

tallis whats missing from this photo for the weekend boy

Is it a trick question? The photos missing from the photo? I think I can read your mind tho...

[Bert]

regan rung to see if you were going to the meeting but he said no answer ,


I rung to see if he would take the t2 smoker out for the day

.??????????
:wacko::wacko::wacko::wacko::beer:

No ring ring you guys dialling the wrong number or something wrong with my phone...
Not really feeling the love...

[mr bucketracer]

.??????????
:wacko::wacko::wacko::wacko::beer:

No ring ring you guys dialling the wrong number or something wrong with my phone...
Not really feeling the love...oh fuck...i can't win

[Bert]

oh fuck...i can't win

Na on track I can't win!!! :bleh::bleh::bleh::bleh::msn-wink:

Seems as your phone is off tonight (or screening my calls). Is it possible to pick up the bucket tomorrow night so I can use it on Sunday (not sure when your off north).
Hopefully the dyno stuff arrives tomorrow.

[Henk]

Na on track I can't win!!! :bleh::bleh::bleh::bleh::msn-wink:

Seems as your phone is off tonight (or screening my calls). Is it possible to pick up the bucket tomorrow night so I can use it on Sunday (not sure when your off north).
Hopefully the dyno stuff arrives tomorrow.

Go north young man.

[Bert]

Go north young man.

Love too, but either hang out here this weekend or the weekend of tokoroa...
Good old work life balance.:mad:

[mr bucketracer]

Na on track I can't win!!! :bleh::bleh::bleh::bleh::msn-wink:

Seems as your phone is off tonight (or screening my calls). Is it possible to pick up the bucket tomorrow night so I can use it on Sunday (not sure when your off north).
Hopefully the dyno stuff arrives tomorrow.can drop around this morning ?phones dead, dyno stuff lost , will cheak this morning

[Bert]

can drop around this morning ?phones dead, dyno stuff lost , will cheak this morning

Yip... Cool I'll wait for you (but please not too late).

[TALLIS]

Two days, two hours, two minutes! It's on!
One downer is the stocker engine in the two hour 4 banger slut, as the piston decided to part ways with the oil rings on the weekend. Looks like we better pack the Speedos, its gonna be wet!

[mr bucketracer]

Two days, two hours, two minutes! It's on!
One downer is the stocker engine in the two hour 4 banger slut, as the piston decided to part ways with the oil rings on the weekend. Looks like we better pack the Speedos, its gonna be wet!never seen that happen before but hope it rains now for lesser power but should be ok ...i hope lol

[steamroller]

Two days, two hours, two minutes! It's on!
One downer is the stocker engine in the two hour 4 banger slut, as the piston decided to part ways with the oil rings on the weekend. Looks like we better pack the Speedos, its gonna be wet!

thats the thing when you have a 4t you all ways seam to be working on them at home and the track go 2t:devil2:

[Henk]

Two days, two hours, two minutes! It's on!
One downer is the stocker engine in the two hour 4 banger slut, as the piston decided to part ways with the oil rings on the weekend. Looks like we better pack the Speedos, its gonna be wet!

Metvuw
http://www.metvuw.com/forecast/forecast.php?type=rain&region=nzni&noofdays=7
Says a bit shit Saturday but OK Sunday, last time it was wet for the start and then dried out, there were some spectactulary toasted wets by the end of the day.

[Bert]

Scott is happy again, I'm back in the team again...

Dyno is back running :clap:

[seymour14]

Thank Christ for that, I thought I would have to hide forever...:D

[Bert]

Thank Christ for that, I thought I would have to hide forever...:D

:nya::woohoo::woohoo::woohoo::bash:

Are you heading north? If not give me a call tomorrow at work.

[seymour14]

:nya::woohoo::woohoo::woohoo::bash:

Are you heading north? If not give me a call tomorrow at work.

Don't have a cellphone, don't have your cellphone number, don't have time.

Work is a mess at the moment, I only go to draw a wage...

[TALLIS]

thats the thing when you have a 4t you all ways seam to be working on them at home and the track go 2t:devil2:

Mate..... what were you saying?

[mr bucketracer]

Mate..... what were you saying?lol ,he can join the 2 stroke sit around club:lol:

[TALLIS]

lol ,he can join the 2 stroke sit around club:lol:

The sad thing is we are all slowly heading that way :baby:

[mr bucketracer]

The sad thing is we are all slowly heading that way :baby:317371we are

[Pumba]

The sad thing is we are all slowly heading that way :baby:


we are

Well I would hate to see all those valves and cams lying around the workshop depressing you all. While you all are in Aucks over the weekend I will pop down and clear out the shed and you will never have to worry yourselves about them again.

What is the address?

[seymour14]

31 Mathews Avenue, Takaro, Palmerston North.

You may have to do some searching.:laugh:

[TZ350]

31 Mathews Ave is a refuse transfer station.....:jerry:

[mr bucketracer]

Well I would hate to see all those valves and cams lying around the workshop depressing you all. While you all are in Aucks over the weekend I will pop down and clear out the shed and you will never have to worry yourselves about them again.

What is the address?
we can allways do a deal on a fxr blowen bottom end

[jasonu]

31 Mathews Ave is a refuse transfer station.....:jerry:

Right next to Coronation park.

[seymour14]

That refuse centre does look like a potentially good bucket track, all be it for the smell.

And the seagulls flying into our front fairings....;)

[Pumba]

blowen

Supercharged FXR?

[Bert]

Given I noticed Dave lurking


http://www.youtube.com/watch?v=wBTKlIrday8

[F5 Dave]

Should have given your dads gaff. Its not a refuse station by any means, but the advice you might need to search still stands.

[mr bucketracer]

makes such good hp at low rpm :eek: hard to get a det out each run

[steamroller]

Should have given your dads gaff. Its not a refuse station by any means, but the advice you might need to search still stands.

your say gay you should try having a drink you make more power that way

[F5 Dave]

I should have quoted Kerry, Berts post was done seconds before mine making mine a bit confusing. Yours however, well I'll let you explain it. Something about drinking?

[seymour14]

I should have quoted Kerry, Berts post was done seconds before mine making mine a bit confusing. Yours however, well I'll let you explain it. Something about drinking?

Them's fighting, oops, thirsty words.

My doctor prescribes my drinking, just enough to forget everything I do at work of a day. But not enough to muck up the evenings.

Sometimes I overdose...:msn-wink:

[Bert]

Them's fighting, oops, thirsty words.

My doctor prescribes my drinking, just enough to forget everything I do at work of a day. But not enough to muck up the evenings.

Sometimes I overdose...:msn-wink:

It's a fine line :innocent:

[TALLIS]

Well, the throw together fxr engine has been run in now. May need an oil change... was hard to keep it at 3/4 throttle for the two hour running in period, but turns out it was enough to get the job done

[F5 Dave]

As I said on the other thread; congratulations more than a solid ride.

[mr bucketracer]

Well, the throw together fxr engine has been run in now. May need an oil change... was hard to keep it at 3/4 throttle for the two hour running in period, but turns out it was enough to get the job donewatch the last 10seconds lol https://www.youtube.com/watch?v=SuMO_GN9zqwbring home the booty

[seymour14]

Your onboard camera isn't what I expected...:laugh:

[mr bucketracer]

Your onboard camera isn't what I expected...:laugh:high octane crazy shit lol

[mr bucketracer]

stroud says he will stick to superbikes , 2 hour and buckets is just to much (-: lol
317480

[jasonu]

stroud says he will stick to superbikes , 2 hour and buckets is just to much (-: lol
317480

Did he fill out the indemnity form?

[seymour14]

stroud says he will stick to superbikes , 2 hour just to much (-: lol
317480

Wouldn't be surprised if many of the two hour bods are still feeling the pain.

Those two in particular only did the one swap over too if I'm correct?

[Henk]

Malcolm and I did half hour stints and my legs still hurt. I don't want to contemplate a one change strategy.

[fi5hy]

Feel as good as gold, jumped off and twenty minutes later wanted to go again. Iron man two hour next year I say or even a four hour two man.

[mr bucketracer]

Feel as good as gold, jumped off and twenty minutes later wanted to go again. Iron man two hour next year I say or even a four hour two man.they would not let me do it buy my self even though no way i could last unless i take it easy , seems you have to have a parter, i have do doubt you could do the hole thing hard from start to finsh:Punk:

[seymour14]

Malcolm and I did half hour stints and my legs still hurt. I don't want to contemplate a one change strategy.

That's what the boys ended up doing. Somehow the big guy had recovered enough to smash home those last laps.

Close run thing though, what was the closest margin of all time? Or was that it?

[rodg]

Nice work lads. One superbly built and prepared bike, two very good but somewhat ugly riders, and the required bit of good luck necessary to win any endurance race, and it was a well deserved win for the out-of-towners. Chris and I did our best for Auckland and 2 strokes but could only manage third.

[mr bucketracer]

Nice work lads. One superbly built and prepared bike, two very good but somewhat ugly riders, and the required bit of good luck necessary to win any endurance race, and it was a well deserved win for the out-of-towners. Chris and I did our best for Auckland and 2 strokes but could only manage third.2 ugly riders?not what your parter said to them lol (-;

[rodg]

2 ugly riders?not what your parter said to them lol (-;

Terrene: You wish!

[TALLIS]

Firstly, thanks rod.... I think? Lol
Secondly, you are now calling yourself an Aucklander ? What next....
Sorry to here you won't be at first round of the north islands as your riding so well, but I'm sure it going to be hectic at the pointy end all summer, so in another way I'm glad!

[TALLIS]

Anyways, the little 50 projects are taking shape. The target is a rather conservative 11hp for my one, and the sky's the limit with Scott's. Hopefully they will be ready early next year. Mint!

[seymour14]

I just had the maddest dream.

Burt Munro Challenge looks awesome, and I guess it would be every bucket racers dream to knock that one off so to speak. Chances of getting into a street race with so many competitors always looks slim to non existent.

Just had a peak at the local Kart Track on the web, very close to Oreti Beach, right in the thick of the action.

Food for thought, maybe they would be receptive for a two day event.

I will go take some more pills now...delusions fading, feelings of grandeur diminishing...:drool:

[TALLIS]

I just had the maddest dream.

Burt Munro Challenge looks awesome, and I guess it would be every bucket racers dream to knock that one off so to speak. Chances of getting into a street race with so many competitors always looks slim to non existent.

Just had a peak at the local Kart Track on the web, very close to Oreti Beach, right in the thick of the action.

Food for thought, maybe they would be receptive for a two day event.

I will go take some more pills now...delusions fading, feelings of grandeur diminishing...:drool:

That seems too good to be true.....

[F5 Dave]

Put it on a slope and it looks like Kaitoki.

[mr bucketracer]

317571nicks 50 coming along fine, rebuilt motor , going for a 11-12 hp with a nice fat power to suit the heavy weights

[TALLIS]

317571nicks 50 coming along fine, rebuilt motor , going for a 11-12 hp with a nice fat power to suit the heavy weights

Aiming for sub 60kg all up :msn-wink:

[rodg]

Palmy boys - Terrene and I are coming down for the Manfield racing on 12-13 December. On the scrounge for a portable generator for tyres warmers. Any chance you likely lads have one we can borrow for the weekend? cheers, Rod

[jasonu]

Aiming for sub 60kg all up :msn-wink:

Including the rider?

[Grumph]

I just had the maddest dream.

Burt Munro Challenge looks awesome, and I guess it would be every bucket racers dream to knock that one off so to speak. Chances of getting into a street race with so many competitors always looks slim to non existent.

Just had a peak at the local Kart Track on the web, very close to Oreti Beach, right in the thick of the action.

Food for thought, maybe they would be receptive for a two day event.

I will go take some more pills now...delusions fading, feelings of grandeur diminishing...:drool:

Can't see it happening sorry...Officials are always in short supply at the Burt. Teretonga, Saturday, late PM the officials make a run for the speedway to run that meeting. Finding a gap in the programme would be very hard. Plus there's next to no bucket activity there so very small local competitor base to draw on.
If you want to run a bucket on a street circuit, come to Methven at Easter...Great day out.

[Bert]

Palmy boys - Terrene and I are coming down for the Manfield racing on 12-13 December. On the scrounge for a portable generator for tyres warmers. Any chance you likely lads have one we can borrow for the weekend? cheers, Rod

Should be able to help you out. I'll see if I can grab one of the ones from work.

[steamroller]

Palmy boys - Terrene and I are coming down for the Manfield racing on 12-13 December. On the scrounge for a portable generator for tyres warmers. Any chance you likely lads have one we can borrow for the weekend? cheers, Rod

yip good as gold we can help and if you need a place to stay to.

[seymour14]

yip good as gold we can help and if you need a place to stay to.

The hills have eyes...:Pokey:

[richban]

Palmy boys - Terrene and I are coming down for the Manfield racing on 12-13 December. On the scrounge for a portable generator for tyres warmers. Any chance you likely lads have one we can borrow for the weekend? cheers, Rod

The good thing about Manfield is there is power everywhere. Even out on the grass there are posts sticking out of the ground. you should be sweet.

[F5 Dave]

Aiming for sub 60kg all up :msn-wink:
My RG50 was 59.5kg with a fanatical approach to weight. Was actually heavier in the RS chassis.

[mr bucketracer]

5 stroke http://www.ilmor.co.uk/capabilities/5-stroke-engine

[TALLIS]

Solid afternoons effort, leaving only a few minor touch's before the weekend. Had it fired up on ether! Amazing what a few brews between mates can turn out. Sorry Dave, well under 60....

[TALLIS]

She looks better from this side317615

[rodg]

yip good as gold we can help and if you need a place to stay to.

Thanks. Accommodation sorted with old mx buddy. Also gave got spot in a garage now so no need for generator. All that's left is learning to ride fast! Looking forward to Manfield. Also doing Cemetery circuit a couple of weeks later. Cool, scary

[rodg]

Solid afternoons effort, leaving only a few minor touch's before the weekend. Had it fired up on ether! Amazing what a few brews between mates can turn out. Sorry Dave, well under 60....

Cool. Wonder what I did wrong with mine as its more like 63. Are you running stock springs? I am and they are too soft for me. But I'm quite a bit bigger and stronger than you

[goose8]

Very cool hope to see it on the weekend
Solid afternoons effort, leaving only a few minor touch's before the weekend. Had it fired up on ether! Amazing what a few brews between mates can turn out. Sorry Dave, well under 60....

[jasonu]

She looks better from this side317615

It looks good from all angles!!!

[mr bucketracer]

317643it lives , 11.6 hp , just played with the old rm125 ignition

[Bert]

317643it lives , 11.6 hp , just played with the old rm125 ignition

Looks really good, now just a little bit of airjet mods and it will be right up there.

[TALLIS]

At least it got some heat into those old wets on the dyno :niceone:

[F5 Dave]

At not many revs, well done. I'd always throw a new rodkit at an engine that has sat around. Learnt that the hard way too many times. Far too many. Slow learner.

Suzuki parts average. Yamaha parts good.

[mr bucketracer]

At not many revs, well done. I'd always throw a new rodkit at an engine that has sat around. Learnt that the hard way too many times. Far too many. Slow learner.

Suzuki parts average. Yamaha parts good.this has new bore , piston , rod kit , all bearing and engine seals , best just to do it , sick of fixing stuff down the track by trying to save a dollar , i'm glad it makes ok hp at lower rpm as well

[mr bucketracer]

At least it got some heat into those old wets on the dyno :niceone:can't wait for a blow down the road. get a good cop chase happing :Police:

[mr bucketracer]

just got to get nick to help me get mine going :niceone:

[TALLIS]

just got to get nick to help me get mine going :niceone:

Plenty of time Friday morning, see you around 3am ;) yours is next on the "bucket list" lol

[seymour14]

Plenty of time Friday morning, see you around 3am ;) yours is next on the "bucket list" lol

Have you been invited to the pre-drinks drinkathon tonight? Somebody gotten older all of a sudden...

Happy birthday that somebody!:cool:

[mr bucketracer]

silly new phone don't work , old one cut of

[TALLIS]

Have you been invited to the pre-drinks drinkathon tonight? Somebody gotten older all of a sudden..


Had technical d ificultys (work) so was in able to make an appearance. I'm sure happy times were had, I also hope the 50 wasn't tested down the road last night....

[seymour14]

Had technical d ificultys (work) so was in able to make an appearance. I'm sure happy times were had, I also hope the 50 wasn't tested down the road last night....

Roads? Who needs roads...

[Bert]

Had technical d ificultys (work) so was in able to make an appearance. I'm sure happy times were had, I also hope the 50 wasn't tested down the road last night....

That's ok I didn't even get an invite... Had the big boys prezzies sitting all wrapped and everything. More for the weekend I guess...

[mr bucketracer]

Had technical d ificultys (work) so was in able to make an appearance. I'm sure happy times were had, I also hope the 50 wasn't tested down the road last night....you know that new conrod (-:

[mr bucketracer]

That's ok I didn't even get an invite... Had the big boys prezzies sitting all wrapped and everything. More for the weekend I guess...was just who wanted to turn up ,unorganisd war fair

[mr bucketracer]

just went for a burn on the 50 , went good , not a great rush of power but pulls me in every gear easy

[TALLIS]

just went for a burn on the 50 , went good , not a great rush of power but pulls me in every gear easy

Do the front brakes work?

[mr bucketracer]

Do the front brakes work?yip , got that working

[Pumba]

Do the front brakes work?

What a factory rider....

[mr bucketracer]

What a factory rider....demands from this team, oh man (-;

[Bert]

demands from this team, oh man (-;

Isn't it great to feel loved :hug::hug::hug::hug::drinkup:

Bike all together and brakes bleed (not fantastic as they were, so might have another go or maybe swap the disk back over).... Too many choices: remind me again why I pulled the brakes apart in the first place????:facepalm:

[Henk]

remind me again why I pulled the brakes apart in the first place????:facepalm:

To increase corner speed?

[mr bucketracer]

To increase corner speed?i think to have a smoke:baby::lol:

[Bert]

To increase corner speed?


i think to have a smoke:baby::lol:

See, life so much better taking the piss out of me isn't it???:beer:

And thanks Husa, yip that is my trick as well.

[seymour14]

1st B-Grade race, Tokoroa North Island series...


https://youtu.be/0KHTyXM18N8

[TALLIS]

1st B-Grade race, Tokoroa North Island series...


https://youtu.be/0KHTyXM18N8

Hueston, we have a problem

[seymour14]

Hueston, we have a problem

MP4 format, 1/4 of an hour long, all night to upload and had 480 minutes to go in the morning...

Told my wife to keep watering the computer on the hour until it finishes, should see a result soon.:doh:

[mr bucketracer]

Dynoed my bike ,15 hp and keeps trying to lock the wheel up , dont seem to have any luck:violin: guessing the bigend but who knows

[seymour14]

Dynoed my bike ,15 hp and keeps trying to lock the wheel up , dont seem to have any luck:violin: guessing the bigend but who knows

That's unlucky, after what was looking like potentially a good weekend.

To cheer you up, here comes the first A-Grade race. Mind you, I don't think this will cheer you up...


https://youtu.be/vTIuLYigUfg

[Bert]

Dynoed my bike ,15 hp and keeps trying to lock the wheel up , dont seem to have any luck:violin: guessing the bigend but who knows

Bummer, well at least you know it is actually playing up....
Two engines to build over the next few weeks :brick:
One good thing is that your bloody good at pulling them down and rebuilding them.

[mr bucketracer]

yip the bigend , never been done before so hope i have trouble free riding after this

[TALLIS]

yip the bigend , never been done before so hope i have trouble free riding after this

Who set you up with that engine?! :sweatdrop
Nice to know the "seat of your pants" dyno was working on race day, could of ended up alot worse.

[Bert]

yip the bigend , never been done before so hope i have trouble free riding after this


Who set you up with that engine?! :sweatdrop
Nice to know the "seat of your pants" dyno was working on race day, could of ended up alot worse.

Lucky those parts arrived...:msn-wink:

[seymour14]

Not enough footage of the second B-Grade race to warrant putting it up. So e.t.a on the second A-Grade race is about 2 hours away.

[Henk]

Not enough footage of the second B-Grade race to warrant putting it up. So e.t.a on the second A-Grade race is about 2 hours away.

Awesome, keen to see if Ken going into turn one three wide around Chris and myself looks as dodgy as it felt.

[seymour14]

Awesome, keen to see if Ken going into turn one three wide around Chris and myself looks as dodgy as it felt.

Hope I caught that, hard to keep everyone in the picture sometimes. Can remember catching you three down the main straight in one race (race two?) and I think Chris was the meat in the sandwich! Ken did the late charge to take the pair of you, don't trust those farmers...:sweatdrop

Bad news, with 9 minutes left to go my wife decided to get on the tablet, and it screwed up my upload. Will have to start again tomorrow.

[seymour14]

Sorry Henk, didn't catch the first "three way", so no protest will be entered into. However, got the second bit of "passing on the German autobahn" later on.


https://youtu.be/ICbJbi3reNQ

[Henk]

Sorry Henk, didn't catch the first "three way", so no protest will be entered into. However, got the second bit of "passing on the German autobahn" later on.


https://youtu.be/ICbJbi3reNQ

That was the one, doesn't look nearly as scary as it felt at the time.
Brilliant move by Ken I must say.

[seymour14]

Great racing, hot action, it's what Bucket racing is all about, and the race was lead by a bike running a TF125 farm bike engine go the 2T's.

Hoping the commuter KR gets a look in soon too. Will needs reigning in, he was flying.

[TALLIS]

317851

Wipe on, wipe off

[Bert]

317851

Wipe on, wipe off

Nice..........

[mr bucketracer]

317851

Wipe on, wipe offlooks like i better drop mine around (-:

[seymour14]

Here we go folks, another video.

I thought I was uploading the third B-Grade race, but it looks more like a game of pinball...


https://youtu.be/Fdk7YUwSfK4

[chrisc]

That was the one, doesn't look nearly as scary as it felt at the time.
Brilliant move by Ken I must say.

That was the best race I've had in a while. I'm pretty chuffed with my start around the outside but shit, couldn't keep Ken the mud bugger away. Solid move mate.

Thanks for the video Kerry!

[Askor]

Sorry Henk, didn't catch the first "three way", so no protest will be entered into. However, got the second bit of "passing on the German autobahn" later on.


https://youtu.be/ICbJbi3reNQ

Jeez the tracks you guys run up north are small, I'll have to bring my buckets with me when I come up to visit family sometime :Punk:

[F5 Dave]

Its a different experience from `puna, but well worth it

[Farmaken]

That was the one, doesn't look nearly as scary as it felt at the time.
Brilliant move by Ken I must say.

In the words of Malcolm Mclaren, One Buffalo Girl goin' round the outside, round the outside, round the outside......
Thanks Henk, pretty chuffed to pull that off - thought I was going to end up in the flag tower.
See you at Tammers

[Henk]

In the words of Malcolm Mclaren, One Buffalo Girl goin' round the outside, round the outside, round the outside......
Thanks Henk, pretty chuffed to pull that off - thought I was going to end up in the flag tower.
See you at Tammers

That move round the sweeper at Taumarunui would be a thing of beauty and scary fast.
You staying this time? We can hope for good weather and drink beer in the river again.

[Farmaken]

That move round the sweeper at Taumarunui would be a thing of beauty and scary fast.
You staying this time? We can hope for good weather and drink beer in the river again.

That sounds like a challenge to me... Yes we are staying Friday onwards.
Sounds like a perfect plan.

[Henk]

Jeez the tracks you guys run up north are small, I'll have to bring my buckets with me when I come up to visit family sometime :Punk:

If you think Tokoroa is small, have a look at some of the video from Mt Wellington. 30 second laps.

[kel]

I thought I was uploading the third B-Grade race, but it looks more like a game of pinball...
Fuck that was funny. Unleash the kick! And if that doesn't work, unleash the bowling ball :lol:
Sorry, bad form :facepalm:

[seymour14]

Confession time.

Having watched two-stoke domination over the weekend, I called in some favours (both of them), and threw some bribe money around.

What I bought was Kens and Wills Clutch cables partially cut through, and a quick drop of the flag while they were trying to figure out what was going on.


https://youtu.be/fxJ4D1LqYZY

Nah, that's bullshit. But if you look at the video you will see that I have no defence if this goes to Court.

I am currently moving my bed-ware in with Scott Watson.

[TALLIS]

Cheers for the videos Kerry, it was good to slow abit towards the end of the race to give will a sence of achievement, that's why, honest.
Anyway, stuff f4, f5 is where it's at!

[F5 Dave]

Looks good.

[Pumba]

Anyway, stuff f4, f5 is where it's at!

Keep talking like that and Dave might think that he has been right all these years!

[F5 Dave]

No no, I'll freely admit I have been wrong before.

That one time.

And that was a grey area, maybe I just wasn't as right as I could have been


But the take home message was - I was right.;)

[jasonu]

No no, I'll freely admit I have been wrong before.

That one time.

And that was a grey area, maybe I just wasn't as right as I could have been


But the take home message was - I was right.;)

I thought I was wrong but I was mistaken...:yes:

[Henk]

No no, I'll freely admit I have been wrong before.

That one time.

And that was a grey area, maybe I just wasn't as right as I could have been


But the take home message was - I was right.;)

Please tell me this is a lie. If the rock that is the infallibility of Dave is gone, there can be no certainty in life.

[F5 Dave]

Ahh, my adoring peeps.

[TALLIS]

Ahh, my adoring peeps.

Yes, as soon as I heard of your retirement from racing, I re numbered my bike in your honour. 50 ;)

[speedpro]

If Richban retires I'm renumbering my bike 175 for the same reason

[seymour14]

If Richban retires I'm renumbering my bike 175 for the same reason

Ha Ha. Like it!!

I've gone mad by the way...

[jasonu]

Ha Ha. Like it!!

I've gone mad by the way...

Fancy coasters?

[seymour14]

Fancy coasters?

Yep........;)

[goose8]

Cheers for the videos Kerry, it was good to slow abit towards the end of the race to give will a sence of achievement, that's why, honest.
Anyway, stuff f4, f5 is where it's at!
After having a awesome weekend on the little f5 bike I have to agree.

[Henk]

After having a awesome weekend on the little f5 bike I have to agree.

I used to love doing F4 and F5, the small bike helps your riding heaps as well as double the track time for free. Three classes gets a bit much though.

[goose8]

I used to love doing F4 and F5, the small bike helps your riding heaps as well as double the track time for free. Three classes gets a bit much though.
Will be riding both classes from now on ,an looking forward to the new chassis hopefully improves the lap times abit in f4

[cotswold]

After having a awesome weekend on the little f5 bike I have to agree.

Its not a secret, F5 is the premier class, the 50's rock

[richban]

Its not a secret, F5 is the premier class, the 50's rock

Totally agree there. After all the money I have smoked on the 300 in the last 2 weeks I could have build 3 50s. My 50 build will kick off proper after xmas. Ready for the GP.

[cotswold]

Totally agree there. After all the money I have smoked on the 300 in the last 2 weeks I could have build 3 50s. My 50 build will kick off proper after xmas. Ready for the GP.

Keep posting your progress on the 50 pages Rich, I would like F5 to go free tech rules as it would make the class even more exciting

the rules out of the uk are

Engine:
Two stroke and four stroke engines with a capacity of no more than 50cc.


Transmission:
A minimum of 3 gears and a maximum of 6 gears.


Wheels:
Wheel diameter must be between 16" and 18"

They have now allowed CVT but they have to be chain driven.
Basically the only rule is 50cc and go for it

[mr bucketracer]

Totally agree there. After all the money I have smoked on the 300 in the last 2 weeks I could have build 3 50s. My 50 build will kick off proper after xmas. Ready for the GP.so this is a bad idea you are saying 317965

[richban]

so this is a bad idea you are saying 317965

Never. Just can get pricy when racing. You know the drill.

[fi5hy]

If Richban retires I'm renumbering my bike 175 for the same reason


Come on !!!!!! 200

[chrisc]

Jesus Scott! I'm always impressed by the amount of work the GPR crew puts out. Especially it seems, over this last winter!

If you ever need another rider, even a jaffa, sing the hell out, I'd love to do a series on a GPR! :Punk::ar15:

[mr bucketracer]

Jesus Scott! I'm always impressed by the amount of work the GPR crew puts out. Especially it seems, over this last winter!

If you ever need another rider, even a jaffa, sing the hell out, I'd love to do a series on a GPR! :Punk::ar15:do you want this bike to finsh you off:shutup:see how this go's

[chrisc]

I'll trade you my FXR. They probably need about the same amount of work.

[mr bucketracer]

Kerry just got out of prison 317991

[mr bucketracer]

I'll trade you my FXR. They probably need about the same amount of work.your fxr should go forever

[seymour14]

Kerry just got out of prison 317991

And it looks like I did the wall of death to get out...:lol:

[TALLIS]

And it looks like I did the wall of death to get out...:lol:

Only in Ashurst.... boobs on bikes?

[seymour14]

Only in Ashurst.... boobs on bikes?

They were in front of me,

why do you think I had such a big smile?:ride:

[andrew a]

They were in front of me,

why do you think I had such a big smile?:ride:

Looks like some of them were trying to shield there eyes! Hope you wee zipped up!

[seymour14]

Looks like some of them were trying to shield there eyes! Hope you wee zipped up!

I hope so too, too early for presents.

Was out at the Classic Motorcycle Clubs 'Champagne Breakfast' the day after and got talking about Buckets. Two of them have said they had photographs of bucket racing in the 90's and 80's, hope to get these up some time if they come to fruition. One lot was the Esplanade, the other was the Foodtown Carpark if anyone can remember those days.

Amazing what is out there, makes me think about doing that Bucket Racing book that I threatened to do a while back. PM me with photographs and information if you are willing to help. What would be good is a contribution from every major Bucket Racing stronghold, images of buckets through the years, pictures of tracks that were used, information and pictures of bikes that were successful or maybe less so. Goes for Sidecars as well.

My book on Ashhurst's history is due in 12 years when the 150th anniversary happens, no reason I can't work on two books consecutively.

PM me and I can give my email address over, and lets see where this can go...

[Bert]

I hope so too, too early for presents.

Was out at the Classic Motorcycle Clubs 'Champagne Breakfast' the day after and got talking about Buckets. Two of them have said they had photographs of bucket racing in the 90's and 80's, hope to get these up some time if they come to fruition. One lot was the Esplanade, the other was the Foodtown Carpark if anyone can remember those days.

Amazing what is out there, makes me think about doing that Bucket Racing book that I threatened to do a while back. PM me with photographs and information if you are willing to help. What would be good is a contribution from every major Bucket Racing stronghold, images of buckets through the years, pictures of tracks that were used, information and pictures of bikes that were successful or maybe less so. Goes for Sidecars as well.

My book on Ashhurst's history is due in 12 years when the 150th anniversary happens, no reason I can't work on two books consecutively.

PM me and I can give my email address over, and lets see where this can go...

This is a good idea...
It would cool to do a multi section book:
history from around NZ,
GPs and the like (profiles of multiple GP champions),
special builds over the decades (thinking of Wheelers centre hub, ziffles TF, Jason's RG400 barrelled Thing).
Then the rebirth with the FXRs etc.
I'm sure a few of the Silverbacks have some stories to tell.

[F5 Dave]

Ha the Foodtown carpark was a hoot. The plywood covers over the drains were ok. Until it rained. Won my first race there on the MB50. But crashed 5 times on another meeting there including a hay bale blowing in front of me then later the rod making an appearance. Darrin hit me both times. By accident I'm sure. . .

[richban]

Keep posting your progress on the 50 pages Rich, I would like F5 to go free tech rules as it would make the class even more exciting

the rules out of the uk are

Engine:
Two stroke and four stroke engines with a capacity of no more than 50cc.


Transmission:
A minimum of 3 gears and a maximum of 6 gears.


Wheels:
Wheel diameter must be between 16" and 18"

They have now allowed CVT but they have to be chain driven.
Basically the only rule is 50cc and go for it

Will do. The rules we have a close. I found a nice Ali cylinder that does not say racing on it. Looks very racy though. :rolleyes: Stage 6

[mr bucketracer]

Will do. The rules we have a close. I found a nice Ali cylinder that does not say racing on it. Looks very racy though. :rolleyes: Stage 6i want to see you port one and do your best before going that way , at less you can say you did it ! then the cheater way lol

[mr bucketracer]

If any gpr team member want to come around and sand my fairing and prep for painting i will be a happy guy ....for free that is , just top self :innocent:

[seymour14]

If any gpr team member want to come around and sand my fairing and prep for painting i will be a happy guy ....for free that is , just top self :innocent:

I feel thirsty, you got plenty of sanding gear?:apint:

[mr bucketracer]

I feel thirsty, you got plenty of sanding gear?:apint:about 1000 sheets of sand paper, sis has a sander for me
Y

[richban]

i want to see you port one and do your best before going that way , at less you can say you did it ! then the cheater way lol

Sure. I have already ported the cast cylinder. I know where and when to poor energy into a build. I will still be putting tons of hours into the new cylinder and the engine build. It will all be my design and my work. I will build the pipe / pipes myself. Buying a cylinder that looks good will only get you so far. I plan on going beyond what everyone else has done. Cheater way I don't think so!

[TALLIS]

If any gpr team member want to come around and sand my fairing and prep for painting i will be a happy guy ....for free that is , just top self :innocent:

Plenty of time for sanding tomorrow :sick:

[seymour14]

Plenty of time for sanding tomorrow :sick:

The GPR "boys of steel" have had a great weekend fishing.

Watch out for the McDonalds...:lol:

[seymour14]

Merry Christmas to all bucket racers.

Stay classy...;)

[TALLIS]

Merry Christmas to all bucket racers.

Stay classy...;)
Yes, May all the idiots have a jolly one, May HRC's development budget grow next year and all the actual bucket races do what they do best, tinker and race!

[Bert]

Merry Christmas to all bucket racers.

Stay classy...;)


Yes, May all the idiots have a jolly one, May HRC's development budget grow next year and all the actual bucket races do what they do best, tinker and race!

Merry Christmas to you all.

Let's hope the GPR development budget grows and the team has great success in 2016.

[mr bucketracer]

merry xmas bros , see you on the other side

[mr bucketracer]

Nsr300 going but powervalves are a no go. Brent stayed away. He dose not like me now

[TALLIS]

Nsr300 going but powervalves are a no go. Brent stayed away. He dose not like me now

If it not a bucket don't mention it, all threads are strictly buckets in the bucket section! Gees mate get a clue!!

[mr bucketracer]

If it not a bucket don't mention it, all threads are strictly buckets in the bucket section! Gees mate get a clue!!thats right sorry mr ceo lol

[TALLIS]

Oh no wait, sorry mate there's another thread full of un related bucket shit here, post away, at least it's semi relevant.

[mr bucketracer]

Oh no wait, sorry mate there's another thread full of un related bucket shit here, post away, at least it's semi relevant.lol oh well 70 hp we have losser .time to chuck to back of shed

[mr bucketracer]

318183here we go

[husaberg]

here we go

What herb is that in the background?

[mr bucketracer]

my weed plant

[Bert]

Nsr300 going but powervalves are a no go. Brent stayed away. He dose not like me now

That's a bit rough... I've been on my Christmas bender.
70hp isn't a bad starting point.

I'll dig out some servo motors and bring them up to try out.
Once my head stops thumping...:sick:

[mr bucketracer]

That's a bit rough... I've been on my Christmas bender.
70hp isn't a bad starting point.

I'll dig out some servo motors and bring them up to try out.
Once my head stops thumping...:sick:its like a cry for help (-;sleep drink , i don't know about you young guns (-;

[Bert]

its like a cry for help (-;sleep drink , i don't know about you young guns (-;

Hahaha

Showing my age this morning...

I've got a ZX6 servo and two TZR units - will take a bit of dicking to remap but that's life.

The other thing is to pull down your existing and replace insides (I've had to do that in the past)...

[mr bucketracer]

Hahaha

Showing my age this morning...

I've got a ZX6 servo and two TZR units - will take a bit of dicking to remap but that's life.

The other thing is to pull down your existing and replace insides (I've had to do that in the past)...i want to see if the right volts are going to it , runs slow but does not repond when running , must get a new volt meter

[Bert]

i want to see if the right volts are going to it , runs slow but does not repond when running , must get a new volt meter

Check your phone???

[mr bucketracer]

Check your phone???got your text at 1130 (-;

[Bert]

got your text at 1130 (-;

Not much use at 1130 :(

How about I pop up soon (just have to clear it with house manager & her plans).

[mr bucketracer]

Not much use at 1130 :(

How about I pop up soon (just have to clear it with house manager & her plans).ok Bring your cord .cool

[Bert]

ok Bring your cord .cool

Get out of bed and make me a coffee.

[mr bucketracer]

318222very happy 88 hp and not touched jets yet

[Henk]

318222very happy 88 hp and not touched jets yet

That's a lot for a bucket

[Sketchy_Racer]

Looking good,

For what it is worth i've always had to run 4 jet sizes richer on the track from what I run on my dyno, I think that is because my dyno has a low inertia.

Now get that puppy over 90hp!

[mr bucketracer]

That's a lot for a bucketits a ryger engine;)

[mr bucketracer]

Looking good,

For what it is worth i've always had to run 4 jet sizes richer on the track from what I run on my dyno, I think that is because my dyno has a low inertia.

Now get that puppy over 90hp!think I will play safe . I'm sure you are to (-: .will see how far I can go and back it of. Lost fath in my pipes but happy now . Thanks for the map and help

[richban]

Looking good Mate. Now just to fatten her up a little in the middle. What carbs yah runnning? It will be good to know the out come from the pipe test. I am looking forward to seeing it on track should be a hoot.

[mr bucketracer]

Looking good Mate. Now just to fatten her up a little in the middle. What carbs yah runnning? It will be good to know the out come from the pipe test. I am looking forward to seeing it on track should be a hoot.aliexpress carbs 40mm(-; brent knows about them , seems to work ok , played with the power valve and stright away it fatten it up but lost hp (maybe because weather got very hot), some how looks like glens curves are gone and only has the one on the disk , whats your max advance ?

[richban]

aliexpress carbs 40mm(-; brent knows about them , seems to work ok , played with the power valve and stright away it fatten it up but lost hp (maybe because weather got very hot), some how looks like glens curves are gone and only has the one on the disk , whats your max advance ?

Mine is a true 16 deg at peak power. Running Avgas. You should clock in tdc on the fly wheel. Mark it and check it. They are all different.

[mr bucketracer]

Mine is a true 16 deg at peak power. Running Avgas. You should clock in tdc on the fly wheel. Mark it and check it. They are all different.this one is set at 17 , yes you are right , flywheel could put it out , was thinking 16 max , what main jet you running , just as a guide , have 183 in it at the mo?

[richban]

this one is set at 17 , yes you are right , flywheel could put it out , was thinking 16 max , what main jet you running , just as a guide , have 183 in it at the mo?

Cool. Mine is running 2 main jets rich at the moment. 188 top cylinder and 195 bottom. I think. After I ported the exhaust it wanted more fuel.

[mr bucketracer]

Cool. Mine is running 2 main jets rich at the moment. 188 top cylinder and 195 bottom. I think. After I ported the exhaust it wanted more fuel.sweets thanks , i should try richards spears pipes as well

[richban]

sweets thanks , i should try richards spears pipes as well


For sure. Those pistons will not take much abuse so keep them wet with gas unless you want drama. We will have another single ring option soon.

[TALLIS]

Happy new year's hillbillies

[mr bucketracer]

You all suck happy new year

[seymour14]

You all suck happy new year

We do suck, we sucked up all your liquor. Nice touch having dispensers mounted all over the place.

Happy New Year, should be a good one...:D

[Bert]

We do suck, we sucked up all your liquor. Nice touch having dispensers mounted all over the place.

Happy New Year, should be a good one...:D

Sorry we had to leave so early (and get there so late). But great GPR New Years.
So what's the plans for 2016???

Hope everyone's heads were clear this morning :drinknsin:drinknsin:drinknsin

[seymour14]

Sorry we had to leave so early (and get there so late). But great GPR New Years.
So what's the plans for 2016???

Hope everyone's heads were clear this morning :drinknsin:drinknsin:drinknsin

Hopefully Steamy has some news for us tonight, as we celebrate New Years Day with a few more drinks...:wait:

[mr bucketracer]

Hopefully Steamy has some news for us tonight, as we celebrate New Years Day with a few more drinks...:wait:ok just cracked 30hp :drool:31837929.5hp at 10500 the best for regans fun lol

[Bert]

ok just cracked 30hp :drool:31837929.5hp at 10500 the best for regans fun lol

Whoop whoop.

So close to the magic numbers...

Maybe let the weather cool down a little more and we will see the sparks fly....

Anyway finally uploaded..


http://youtu.be/TyU8PNnVUSQ

[TZ350]

ok just cracked 30hp :drool:31837929.5hp at 10500 the best for regans fun lol

Good effort ... now I have to pull finger and get my bike going again.