Bucket bits 4 sale

[Slingshot]

anyone want wire wheels for there slicks
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-186569455.htm
Jesus...not at that price!!

This is more the ticket:

<img src="http://images.trademe.co.nz/photoserver/82/79056782_full.jpg"></img> (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-accessories/Wheels-tyres-brakes/auction-186364004.htm)

[Buckets4Me]

thats not a bad price for new rims
normaly you pay around 260 for the rim alone
if you can find them

you would rather pay $100 for a rim thats 3 times the weight
and dosent look as bling. your cheap
do you race buckets ????

[Slingshot]

do you race buckets ????

The answer to that question should be obvious.

[CM2005]

now how dose it go Piss off mate I'm after that :shutup: :shifty:
please lol
dont let me stop you from biding



what?? i'm pretty sure i have dibs on this one ;):jerry: :jerry:

[Skunk]

Everyone don't leave it alone! I'm not buying it. :wacko:

[gav]

Jesus...not at that price!!

This is more the ticket:


Yeah but you'd hope it would have disc and sprocket carrier for that sort of money?

[PirateJafa]

Nice one, will these at some stage grace the track again, or do you have other plans?

Yep, we were busy welding bits on today.

Will be a good while yet - doesn't help that I'm going back into surgery soon.

Necro post! Buahaha.

[Mrs Busa Pete]

Check this one out for you deep pocket bucketers

www.trademe.co.nz/Browse/Listing.aspx?id=189068369

[quallman1234]

Duh. Nevermind.

[gav]

Check this one out for you deep pocket bucketers

www.trademe.co.nz/Browse/Listing.aspx?id=189068369
Wow, imagine the value for money with that! Buckets, bears lightweight, Pre 82 and the occasional trail ride!

[Slingshot]

I've just brought Digital Vernier Calipers from The Warehouse (of all places).

They cost $20, they don't feel like the top of the line kit but they're actually pretty good.

One of the handiest pieces of kit you can have IMHO.

[Skunk]

Steel or plastic?

[Trudes]

I've just brought Digital Vernier Calipers from The Warehouse (of all places).

They cost $20, they don't feel like the top of the line kit but they're actually pretty good.

One of the handiest pieces of kit you can have IMHO.

What are they and why do I need them?

[Skunk]

You know the thing I grab when I check the diameter of a tube, width of something small? That thing. It also measures hole depth and other stuff™

[Trudes]

Oh THAT thing, those are cool.... I like measuring holes and things:laugh:

[piston broke]

Oh THAT thing, those are cool.... I like measuring holes and things:laugh:
i knew things were gonna turn bad a coupla posts ago:wacko:

[Slingshot]

Steel or plastic?

Steel. I'll post a pic.

<img src="http://www.kiwibiker.co.nz/forums/albums/thumbs/11/26b534f6d7134cbe7aa4e0af3de1c08e_11347.jpg?dl=1227 692101"></img> (http://www.kiwibiker.co.nz/forums/picture.php?albumid=941&pictureid=11347)

[Skunk]

Steel. I'll post a pic.
A steel one at that price is a... well, umm, ...a steal.

[nudemetalz]

hmmm,..thanks for the heads-up, Slingy. I just broke my plastic one and need a new one so tomorrow I shall go shopping :)

[SHELRACING]

I have for sale if anyone's interested a modified front end for a cb 125t. This will considerably improve your handling. and is modified for an FXR 2.15 x 17 front wheel, and a hydraulic disc.

Forks, new seals not long ago, cut springs + spacers. adaptor bracket for caliper. machined for the front wheel. $50

Caliper. NSR250 caliper for said forks. $30

Fork brace. $20

Disc. Modified mount. matched for alignment/ spacing with the forks and caliper. $25

Clipons. Home made from a top tripple clamp. Bars not included just the holders. $15

Bars. For the clipons (if I can find them) $15

Total $155 if you want all of it $125
Plus postage

NOT included
Master Cylinder
FRONT WHEEL. I have a 2.15 x 17 front wheel machined with the axle and spacers. That will fit straight in. It's not for sale, but if you can supply me a standard FXR 2.15 x 17 fornt wheel I am happy to exchange.

Preference given to the person who wants the most parts. It's going on Tardme over the coming weekend.

Cheers
Steve

[Slingshot]

Does anyone have a spare bottom triple clamp for an FXR?

I've just realised the one that I have is bent. :argh:

[ajturbo]

Does anyone have a spare bottom triple clamp for an FXR?

I've just realised the one that I have is bent. :argh:
should that help???

[Pumba]

Does anyone have a spare bottom triple clamp for an FXR?

I've just realised the one that I have is bent. :argh:

Yep Ive got one lying around. I am not surewhat AJ is on about so if you still need it just yell out.

[Skunk]

Yep Ive got one lying around. I am not surewhat AJ is on about so if you still need it just yell out.
I'm never sure want he's on about...

[SHELRACING]

Yep Ive got one lying around. I am not surewhat AJ is on about so if you still need it just yell out.

Hey pumba thought you were off to U.S of A. Wazup. Got sum pics and a great vid of you following (of course) me :bleh: at Taumarunui. Can send you a CD if you PM me your address.

U coming to Taupo now then ??

[Pumba]

Hey pumba thought you were off to U.S of A. Wazup. Got sum pics and a great vid of you following (of course) me :bleh: at Taumarunui. Can send you a CD if you PM me your address.

U coming to Taupo now then ??

That would be great, PM sent.

Fly out next Friday to the states, so no I am still going to miss taupo :cry:

[Slingshot]

should that help???

Ummmm......

Yep Ive got one lying around. I am not surewhat AJ is on about so if you still need it just yell out.
Yeah...just let me know how much you want for it and I'll use the bent one that I've got to fashion some clip-ons out of.

Cheers.

[Skunk]

Turners in Auckland (http://www.turners.co.nz/Vehicles/Pages/Vehicle.aspx?RefID=596888&scrpage=sea)

[Nasty]

http://www.kiwibiker.co.nz/forums/showpost.php?p=1871501

$600 ONO

[Skunk]

I need a two stroke muffler to suit a 23mm diameter stinger. Anyone got one before I hunt on TradeMe?

[Kendog]

Is mine 23mm?

[Kendog]

I need a two stroke muffler to suit a 23mm diameter stinger. Anyone got one before I hunt on TradeMe?

Is mine 23 mm?

[Buckets4Me]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Classic-vintage/auction-195819095.htm

cb125 twin

[Buckets4Me]

http://www.kiwibiker.co.nz/forums/showthread.php?t=89037

FXR anybody

[Pumba]

http://www.kiwibiker.co.nz/forums/showthread.php?t=89037

FXR anybody

Bit late, sold today

[piston broke]

front wheel,disc,forks, suitable a100,anyone got something?

[Skunk]

http://www.kiwibiker.co.nz/forums/showthread.php?t=89037

FXR anybody

Sold to a Welly bucket racer Str8 "Hell on wheels" Jacket no less.

[Skunk]

front wheel,disc,forks, suitable a100,anyone got something?
You'll have to adapt something, measure up things like RG150 or FXR150 front ends. Check the overall length of the fork from the axle to the bottom triple clamp and from the bottom triple clamp to the top one. Next thing to check is that the bearing match in the steering head.

On my AX100 I had the steering stem machined off the AX triple clamp and welded onto the bottom clamp of the forks I was putting in. A little adaptation at the top and it was good to go. I used CB125T forks with emulators from Robert Taylor. 33mm is the smallest emulator available. You don't need emulators normally but I did due to the height of the steering head on the AX. It left no room for the fork action so I needed more control over the suspension.

[Skunk]

I also need an 24mm carb for a two smoker. Would like the spigot as well if you have one.

[Skunk Control]

I also need an 24mm carb for a two smoker. Would like the spigot as well if you have one.

Are you buying more bits.......:spanking:

:rofl: :rofl: :rofl:

[Ixion]

Does anyone know where a Yamaha LS-2 , complete bike or engine only might still be lurking? Condition immaterial.

[Buddha#81]

I also need an 24mm carb for a two smoker. Would like the spigot as well if you have one.

Bigger more avaliable Flatslide and get a 24mm choke turned up.:Punk:

[Skunk]

Bigger more avaliable Flatslide and get a 24mm choke turned up.:Punk:
But... but, that means spending money!

[Buddha#81]

A chunk of alloy or nylon and a lathe carnt be too expensive. loctite it in and presto a 24mm flatslide.

Its been done down here on a very sucessful bike, so it works.

[Skunk]

Geez, I'm slow today - must be the heat or the lack of alcohol... Cheers Budda

I'm emptying out my shed of tyres - all listed on www.bucketracing.co.nz (http://www.bucketracing.co.nz/index.php?pg=sale) (pics of each tyre there too).

[F5 Dave]

Tony Macs RGV had a thin turned sleeve in the carb.

[wbks]

Anyone have a 6 volt coil to suit a cb125 twin?

[gav]

Anyone have a 6 volt coil to suit a cb125 twin?
So you've got a 6v battery now then? :msn-wink:

[wbks]

Going to try and find a 6volt batt and a new 6v coil. Someone said the points wear out faster with the 12v setup. Kinda want something reliable that I can pretty much just get on and ride without replacing shit all the time just for it to run a LITTLE bit better...

[Skunk]

Three letters:
CDI.

And the bonus statement:
12 volts

[wbks]

So care to tell which CDI fits my bike and is it expensive and or hard to install?

[nudemetalz]

Talk to Sully60. He's the expert on the twins :niceone:

[Skunk]

That'll be the CDI and pickup from a CB125Twin. Same as yours but later model I think. It's what I've got on mine. Sully60 has a full-on electronic pickup and stuff.

[Sully60]

Anyone have a 6 volt coil to suit a cb125 twin?

I have some, you're welcome to them but see below

So care to tell which CDI fits my bike and is it expensive and or hard to install?

I've already made the following suggestion (http://www.kiwibiker.co.nz/forums/showpost.php?p=1877960&postcount=64)


Going to try and find a 6volt batt and a new 6v coil. Someone said the points wear out faster with the 12v setup. Kinda want something reliable that I can pretty much just get on and ride without replacing shit all the time just for it to run a LITTLE bit better...


Three letters:
CDI.

And the bonus statement:
12 volts
^^^^:yes:
To add to my earlier suggestion try getting in touch with the Loncin man. He might have something that works Nudemetalz is one of the few on here who would have his details. I'd envisage spending maybe a couple of hundred dollars but if the engine is in reasonable condition it would be worth it in the long run.




Talk to Sully60. He's the expert on the twins



I think there's someone a bit closer to wbks that fits that description better than I.

[wbks]

Well the CDI sounds good and all but I don't really have a couple hundy to spend right now. Maybe in feb when I'll have to get a job and then I could pay for it. So what about these coils? How much would you want for one?

[Skunk]

FZR250 frame (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Frames/auction-197207493.htm) on TradeMe.

[Pumba]

Honda MB50 Engine (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-198182148.htm)

[gav]

Honda MB50 Engine (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-198182148.htm)
Includes rest of stuff as well does it? 2 sets of rims etc?

[Pumba]

Wouldnt have a clue, best you ask the guy on the auction

[quallman1234]

TF125 motor.

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-198199315.htm

[koba]

Honda MB50 Engine (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-198182148.htm)

Could anyone in aucks pick that up and sent it down if I bought it?
Edit: Now I see the rest of the stuff with it, question still stands tho.

[steveyb]

I have a 1992 Honda NF4 RS125 frame for sale.
No swingarm, just the frame.
Wanting about $250 ono.
Seen plenty of buckets made out of these frames, so you just know you want it!
stevebagshaw@hotmail.co.uk

Later

Steve

[wbks]

That's cheaper than I was expecting an rs frame to go for. Could be nice for my cb but I'm saving the money to ride an rs with the rest of the HRC parts on it, as you know :yes:

[gav]

Looks like a well sorted bucket for reasonable money?
http://www.trademe.co.nz/a.aspx?id=200169570

[wbks]

Anyone got a 12v coil for a cb125 single?

[Ixion]

I got a T500 Suzuki coil somewhere. Or any old school car coil, Holden HQ that sort of thing.

[Willdat?]

I'm sure people may have spotted this in the main forum, I'm after the RHS plastic, I don't need the lock, just the plastic, prefer blue in reasonable nick!

Thanks!

[ajturbo]

Anyone got a 12v coil for a cb125 single?
wouldn't any old NEIGHBORS car's coil do?

[Kendog]

wouldn't any old NEIGHBORS car's coil do?

What about a van coil, you live pretty close by :shifty:

[wbks]

Nah dont worry about it, the bikes a floater without a cause now

[ajturbo]

What about a van coil, you live pretty close by :shifty:
do diesel's have coils??????

[piston broke]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-201879898.htm

[SHELRACING]

I have some parts for sale to fund my new Pre 89 bike

Feel free to pay lots of money for this stuff cos I need all the cash you've got.

http://www.trademe.co.nz/a.aspx?id=202137502

http://www.trademe.co.nz/Browse/Listing.aspx?id=202132835

Cheers
Steve

[Skunk]

I want this KH125 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Other/auction-202368119.htm) for two reasons. Firstly, I'm restoring one (already have a mint frame), and secondly, I need a Kawasaki frame for my next Bucket.

[b1kerb0b]

I have 3XL one-piece leathers available, brand spanking new, were $1,099 but i can let them go for $550 (half price)... i got sent the wrong ones and they don't want to take them back...

Black/Grey/White, hump at the back, protection/armour at all the usual places.

If you want a pic flick me an email.

[Buddha#81]

FXR front end parts and wheels.......price negotiable for KBers.

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Brakes/auction-203087382.htm
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Wheels/auction-203086595.htm
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Wheels/auction-203085943.htm
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Brakes/auction-203087038.htm
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Handlebars/auction-203088204.htm
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Suspension/auction-203088897.htm

[Pumba]

FXR front end parts and wheels.......price negotiable for KBers.

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Suspension/auction-203088897.htm

If anybody needs a set of springs for these I have a set of bent forks here that they are welcome to, no idea what the internals are like cause I never even bothered to take the end caps off

[Buddha#81]

FXR front end parts and wheels.......price negotiable for KBers.

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Brakes/auction-203087382.htm
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Wheels/auction-203086595.htm
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Wheels/auction-203085943.htm
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Brakes/auction-203087038.htm
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Handlebars/auction-203088204.htm
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Suspension/auction-203088897.htm



Goneski......ya snoze ya loose!

[Pumba]

Honda CB 250 1980 (http://www.trademe.co.nz/Browse/Listing.aspx?id=203026958)

[Citroenjunkie]

Due to a change of location, I'm moving South Henry the bucket is for sale.

I'll post a S1.00 reserve auction on Trade me later today for more info see...

http://www.kiwibiker.co.nz/forums/showthread.php?p=1463137#post1463137

If you just can't wait and want to make an offer..

citroenjunkie@gmail.com

Cheers

P

[Skunk]

Due to a change of location, I'm moving South Henry the bucket is for sale.
Why not take it South with you?

[Squiggles]

If you just can't wait and want to make an offer..


$200 :eek: </10char>

[Citroenjunkie]

Come and collect this sunday if you like? :ride:

[Citroenjunkie]

http://www.trademe.co.nz/Browse/Listing.aspx?id=204396041&ed=true

A few days late but there nonetheless :crybaby:

[Ixion]

Not no more

[piston broke]

Not no more

well done:niceone:

[quallman1234]

Suggestion : Maybe a WTB thread is needed as well?

[Skunk]

Suggestion : Maybe a WTB thread is needed as well?
Start one then...

[SHELRACING]

Start one then...

Ok I'll put my hand up

[SHELRACING]

Start one then...

Done

http://www.kiwibiker.co.nz/forums/showthread.php?p=1949014#post1949014

[rua]

I'm not riding them, someone should.

XL125 $500.00
#17 from Wellington, its black, reliable, noisy and surprisingly quick, the rider is not.

its not real flash but a good fun for someone.

18" wheels currently with some pretty well used slicks, some more and treaded included. Needs more nylon for the cart track.

viewing welcome in Tawa.

GL145 $350.00
Standard, de reg, rooted fork seals and oily pads but otherwise complete and running.

currently in storage but can be retrieved.

[Ivan]

here are some rims

http://www.kiwibiker.co.nz/forums/showpost.php?p=1959154

[bungbung]

Ivan, do you still want the GL rolling chassis?

[Ivan]

Ivan, do you still want the GL rolling chassis?

sorry not now moving overseas so need to save money

[quallman1234]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-205383138.htm

Could be a good starter project.

[SHELRACING]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-205383138.htm

Could be a good starter project.

How well do the motors go, any good ??

[quallman1234]

How well do the motors go, any good ??

Fairly averagely. 4 speed box with no possible mods to swap a 6 or 5 speed into it.

Good for a starting bucket only. Skunk bike is a AX100. He's gotten a fair amount out of his :). But is still limited to the box.

[Trudes]

It's called a clutch, ride the shit out of it! ;)

[Squiggles]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-205383138.htm

Could be a good starter project.

Have seen the bike, needs a fair bit still to complete (Rear brake setup, master cylinder for the front, bits and bobs everywhere). Its more or less been mocked up to see how things fit

[quallman1234]

It's called a clutch, ride the shit out of it! ;)

Nawwwwwwwwwwwwww Just corner quicker so you stay in top the whole time. :done:

[Nasty]

http://www.kiwibiker.co.nz/forums/showthread.php?t=94322
whole bucket racer.

[Pumba]

Might be worth a look for someone

FXR with seized engine (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Other/auction-206713099.htm)

[Buckets4Me]

gp100 already to go





http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Other/auction-206708102.htm

[MsKABC]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-205383138.htm

Could be a good starter project.


Fairly averagely. 4 speed box with no possible mods to swap a 6 or 5 speed into it.

Good for a starting bucket only. Skunk bike is a AX100. He's gotten a fair amount out of his :). But is still limited to the box.



Have seen the bike, needs a fair bit still to complete (Rear brake setup, master cylinder for the front, bits and bobs everywhere). Its more or less been mocked up to see how things fit

Ok guys, so in your opinion, how much work/$$ to turn that bike into an entry-level bucket racer for a noob such as myself? I.e. not super-competitive.

[Skunk]

Ok guys, so in your opinion, how much work/$$ to turn that bike into an entry-level bucket racer for a noob such as myself? I.e. not super-competitive.
Looking at it, a seat is required. That should be all. I assume it runs etc.
DO NOT consider making it any faster than it is. The 4 speed box is not a 'fixable' item unlike the MB/H100. Any money spent is pretty much lost. I speak from experience... If you plan on changing the engine for something else then the frame is worth developing. It'll never be an A grade winner though.

[MsKABC]

Looking at it, a seat is required. That should be all. I assume it runs etc.


Really? So the bits and bobs like brakes etc suggested by Squiggles wouldn't be essential? (I know brakes are essential, but is what's on the bike sufficient?)


DO NOT consider making it any faster than it is. The 4 speed box is not a 'fixable' item unlike the MB/H100. Any money spent is pretty much lost.

Nah, like I said - entry level only required at this stage.


If you plan on changing the engine for something else then the frame is worth developing.

Well that's interesting to know, could be an option!


It'll never be an A grade winner though.

Neither will I mate! :laugh: A friend of mine always says, you can't win the Melbourne cup on a Clydesdale!

[Trudes]

I have a seat and rear end of Pammy's that you could have that'd probably fit providing the frame hasn't been modified so a standard AX seat and arse end doesn't fit any more.

[Skunk]

Really? So the bits and bobs like brakes etc suggested by Squiggles wouldn't be essential? (I know brakes are essential, but is what's on the bike sufficient?)Brakes are overrated. They slow you down.
It depends on whether the bits are there or not and whether the bits that are there fit (eh, Trudes :laugh: ). Anything can be MADE to go. It just takes time and who you know. Bucketeers down here tend to help each other out - I guess it's the same there.

[Trudes]

That's right, if in doubt hit it with a sledge hammer!!:lol:

[MsKABC]

That's right, if in doubt hit it with a sledge hammer!!:lol:

:laugh: Someone on here has a signature that says something along the lines of 'If hitting with a hammer doesn't fix it, it's probably an electrical problem' :laugh:


I have a seat and rear end of Pammy's that you could have that'd probably fit providing the frame hasn't been modified so a standard AX seat and arse end doesn't fit any more.

Might be a goer, cheers :D

[timg]

:laugh: Someone on here has a signature that says something along the lines of 'If hitting with a hammer doesn't fix it, it's probably an electrical problem' :laugh:



Might be a goer, cheers :D

Here's one for you all ready to go. Very reasonably priced too :msn-wink:

http://www.trademe.co.nz/Browse/Listing.aspx?id=209028105

[MsKABC]

Here's one for you all ready to go. Very reasonably priced too :msn-wink:

http://www.trademe.co.nz/Browse/Listing.aspx?id=209028105


That is a very sweet looking little bucket mate and a reasonable price too, but unfortunately it's in the wrong island! :( It would look great next to my honda road bike and hubby's honda bucket - then they would outnumber Ducati in our garage 3 to 1! :lol:

Good luck with the sale, hope she goes to a good home :D

[SHELRACING]

If it hasn't been posted already.

Good looking twin. In road form, so will need setting up. Definately worth a look. :niceone:

[Spyke]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Frames/auction-209944525.htm

rgv frame buy now of 50 bucks

[Buckets4Me]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-212007950.htm

zzr 150 lonchin :gob:

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-211794898.htm

100 cc 2 stroke honda

[Mrs Busa Pete]

rg150 with blowen motor
http://www.trademe.co.nz/Browse/Listing.aspx?id=212810695

[Yow Ling]

FXR bits and pieces, brake master , lowered seat bla bla bla http://www.fxr150.co.nz/discussion/viewtopic.php?f=4&t=47

[Hazzard]

Hi guys. Ive just started making 1995 RS125 tail sections that are perfect for buckets. Selling on here for $100. I also do all forms of fibreglass custom work if required.Cheers,Harry.
http://www.trademe.co.nz/Browse/Listing.aspx?id=213686287

[phoenixgtr]

Awesome Hazzard!! I've been wondering where I could get one of those!!

Actually, do you think it would fit an FXR? I noticed on trademe you said it was 155mm across the top front. I just went out to shed with the tape measure and it looks like it might be a little narrow EDIT: Don't worry. I've been told they will fit with a bit of work. PM on it's way

[Hazzard]

Just finished making a new front number board for my bucket. Am selling them on here for $40. Pics on TM http://www.trademe.co.nz/Browse/Listing.aspx?id=216264160&ed=true

[ajturbo]

Just finished making a new front number board for my bucket. Am selling them on here for $40. Pics on TM http://www.trademe.co.nz/Browse/Listing.aspx?id=216264160&ed=true
they look great.!!!

now to find a bike they will fit..

[Shorty_925]

Hi guys,

I have 3 for sale.

RG50, completely standard, has been ridden twice, up for $850.

CBR250, motor not working, though wouldnt take much to get going, ideal rolling chassis, complete bike with engine for $1400. Have a set of tyres for this bike for sale as well for $500.

Can supply photos for bike bikes.

[Shorty_925]

Hi guys,

I have 3 for sale.

RG50, completely standard, has been ridden twice, up for $850.

CBR250, motor not working, though wouldnt take much to get going, ideal rolling chassis, complete bike with engine for $1400. Have a set of tyres for this bike for sale as well for $500.

Can supply photos for bike bikes.

Forgot to add the third bike, its a GL145. Complete bike, though stripped down for racing. Will get back later with a price for this as its not mine, but is for sale.

[Shorty_925]

$900 for the GL 145, though currently running TT900 tyres, and these would not be sold on the bike.

[Alive]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-212007950.htm

zzr 150 lonchin :gob:

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-211794898.htm

100 cc 2 stroke honda

The 100cc is back up

http://www.trademe.co.nz/Browse/Listing.aspx?id=216807765

[Skunk]

My old trusty Suzuki AX1R (AX100) engine is for sale. Runs well. Could do with a freshen up (light hone and new piston) but not essential. Done three seasons since last rebuild.

Engine was built by Pete Sales and runs AvGas and Motul 800 at 33:1. Good power though a little peaky for the four speed box.

Complete engine - carb, coil, etc. No chamber.

Comes with spare cases and gearbox.

I'm thinking around $200. Way under what I paid to get it built and sorted.

Note that this is NOT an A100. Very different engines.

[sidwyz]

The 100cc is back up

http://www.trademe.co.nz/Browse/Listing.aspx?id=216807765

I was having a read of his feedback and as it turns out he only paid $100 just over a month ago, nice way to turn a profit!

Looks pretty tidy

[boostin]

My old trusty Suzuki AX1R (AX100) engine is for sale. Runs well. Could do with a freshen up (light hone and new piston) but not essential. Done three seasons since last rebuild.

Engine was built by Pete Sales and runs AvGas and Motul 800 at 33:1. Good power though a little peaky for the four speed box.

Complete engine - carb, coil, etc. No chamber.

Comes with spare cases and gearbox.

I'm thinking around $200. Way under what I paid to get it built and sorted.

Note that this is NOT an A100. Very different engines.
R6 Kid might be interested! Will send him the info.

[Hazzard]

Hi guys and girls. Just adding a new tail section to my range suitable for buckets. Based on RS125 and a little different to whats available here.Will be available soon. Heres a few pics

[gav]

I was having a read of his feedback and as it turns out he only paid $100 just over a month ago, nice way to turn a profit!

Looks pretty tidy
And he got a bit shitty when I asked him what he'd done to it too, lol

[Hazzard]

Hi all. Finished my new tail section. Selling on here for $140.
http://www.trademe.co.nz/Browse/Listing.aspx?id=220390079&ed=true
I will be doing FXR 150 top fairings in the next few weeks. If you are after one drop me a PM for price etc.

[timg]

Hazzard's stuff is good. And a top bloke as well. I've used one of his RS125 tails on my bucket, and he fixed the hack job I did the first time round :doh:

[Pumba]

Dave Diprose is selling up a bike or three

TZR Framed FXR (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-220482282.htm)

Yamaha TZ50 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-220467904.htm)

Metrakit GP50 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-220488199.htm)

[ajturbo]

Dave Diprose is selling up a bike or three

TZR Framed FXR (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-220482282.htm)

Yamaha TZ50 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-220467904.htm)

Metrakit GP50 (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-220488199.htm)
http://metrakit.com.au

[gav]

Interesting that a Metrakit GP50 can contest an F5 title, seeing as it is a purpose built road racing machine? :confused:

24-2-4 Engines must be derived from non-competition motorcycles. Motocross, Road Racing, Enduro and Go Kart motors and transmission parts are not permitted

[ajturbo]

Interesting that a Metrakit GP50 can contest an F5 title, seeing as it is a purpose built road racing machine? :confused:

24-2-4 Engines must be derived from non-competition motorcycles. Motocross, Road Racing, Enduro and Go Kart motors and transmission parts are not permitted
was thinking the same thing...

but then again, if you or i were to get it.... i really don't think the amazing 11hp will get us anywhere....

but if you were a 7 year old.......what a fuckin fun toy to have eh!!!

[Pumba]

Your probbaly not wrong but we dont have enough true F5 bikes to start excluding people

[gav]

Fair enough, all about having fun, eh?

[speedpro]

I seem to recall a conversation with Dave where he explained that the MK50 has a Derbi(?)50 from some hot little street 50 in it now. Having known Dave for a very long time i just can't imagine him cheating. He's like me and just can't see the point of it.

[F5 Dave]

It's a bit of a loose area, like the TZ50, but there is a precedent. Both these bikes have the exact same engine as the street legal bike TZR50 or the GPR or Senda Derbi. Both these bikes have won F5 GPs, they are very fast.

[Buckets4Me]

aha but what about his new derbi
in an rs125 frame with a 80-90 kit on it ????

good on him the rest of you will have to ride harder now <_<

if not you will all have to spend up LARGE (or cheat)

he hasent been winning lately (beaten by fxr's and a cbrt)

[SHELRACING]

aha but what about his new derbi
in an rs125 frame with a 80-90 kit on it ????

good on him the rest of you will have to ride harder now <_<

if not you will all have to spend up LARGE (or cheat)

he hasent been winning lately (beaten by fxr's and a cbrt)

Wrong thread really but....

I spoke to Dave about his new bike, There is probably a transition time for most riders making big changes. As I found going from the FXR motor to a RX 2 stroke. Dave said the bike was a lot smaller in the RS chassis, a fact which Scotty from ESE probably found out. Dave's an experienced and competent rider and I'm pretty sure when he's fully come to terms with the bike he will be as competitive as ever.

By the way SHEL Racing is moving on up:headbang: Two RX125's in develpment with a lot help of TZ350 :clap: and as some of you have guessed Dave's TZ50 now belongs to the SHEL Racing workshop :niceone:

Anyway we love the smelly ol' two strokes now, as for four strokes.... well :zzzz::zzzz::lol:

[Kickaha]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Performance/auction-221683432.htm

[Trudes]

That looks like a neat little bucket!! :niceone:

[Kendog]

That looks like a neat little bucket!! :niceone:

We have three already, no more!

[Pumba]

Incase any one is interested

GSXR250 GJ72A Parts (http://www.trademe.co.nz/Browse/Listing.aspx?id=222369823)

[koba]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Classic-vintage/auction-221933252.htm

Looks like a great deal.

[ajturbo]

i have not been able to get onto trademe all day....!!

WHY???

[Skunk]

Because it's YOU.

[ajturbo]

well i missed out on that engine, as i couldn't increase the auto bid... grrrrrrrrrr

[SHELRACING]

well i missed out on that engine, as i couldn't increase the auto bid... grrrrrrrrrr

Wot did I tell ya !!!

[Skunk]

well i missed out on that engine, as i couldn't increase the auto bid... grrrrrrrrrr
Ferk! you mean I let you to it and you F'd up?!

[ajturbo]

Ferk! you mean I let you to it and you F'd up?!
there was nothing i could do!!!

i could get it up.... on the putter!!!

kept telling me that the site was down..!!!!!!!!!!!!!!!!!!!!!

then i just had to go to work, even this morning i couldn't get on it...!!!

it finally went for $125..... unfortunately i don't have that spare anyway....

[SHELRACING]

KH 125, Ol' wobbler says I have too many bucket projects so I not allowed to bid.

Great project...

http://www.trademe.co.nz/Browse/Listing.aspx?id=222433790

[Skunk]

kh 125, ol' wobbler says i have too many bucket projects so i not allowed to bid.

Great project...

http://www.trademe.co.nz/browse/listing.aspx?id=222433790
mine! Mine!! Mine!!!

[Pumba]

Honda MB50 dirtbike (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Other/auction-222175860.htm)

[Pumba]

Stumbled over this

2002 Suzuki FZR150 motor (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Other/auction-222390300.htm):doh: Surely Brens got an engine or two lying around to exchange with him

Oh and this too

Honda HS100 & MB100 parts for sale "$1" (http://www.trademe.co.nz/Browse/Listing.aspx?id=222339030)

[Skunk]

KH 125, Ol' wobbler says I have too many bucket projects so I not allowed to bid.

Great project...

http://www.trademe.co.nz/Browse/Listing.aspx?id=222433790


mine! Mine!! Mine!!!

I take that back. Funds will not allow. But I so want one... The ZX4-RD will be needing $900 soon.

[gav]

Stumbled over this

2002 Suzuki FZR150 motor (http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Other/auction-222390300.htm):doh: Surely Brens got an engine or two lying around to exchange with him

Yeah, the freight to send one of his old motors up wouldn't be too bad. It'll pretty much all fit into an icecream container. :whistle:

[boostin]

Cheap rear wheel

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Wheels/auction-222712210.htm

[Hazzard]

Hi all, Just finished making FXR top fairings. Top fairing with both sides will be $230 or top fairing by itself will be $130. PM me if your keen. Cheers,Harry.

[SHELRACING]

RG 50 Bucket, looks tidy enough.

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-225053691.htm

[k14]

I need a new axle for the new front end I have just put in my CB. I have no idea what the forks are from, it was given to me by Kickaha and he had no idea either.

I have the measurements, it is a 20mm axle with 25mm at bolt head end. Length from outside to outside is 224mm so I'd need something in the 240mm range. Longer is fine, I can machine to suit!

Any help appreciated. And before anyone asks, yes I have asked a few wreckers. We don't have any local so no luck there!

[RMS eng]

if any one is looking for a race pipe and muffler for 150 bucket,i have a new DMC full race system,it is is for a CRF150R honda,but could be made to fit other bikes?.$360.00 phone chris 09 817 9500

[phoenixgtr]

Hi all, Just finished making FXR top fairings. Top fairing with both sides will be $230 or top fairing by itself will be $130. PM me if your keen. Cheers,Harry.

Look great mate. Unfortunately I don't have the coin lying around right now so will have to save up. Out of curiosity what do the side fairings look like?

[Hazzard]

Hi Phoenix, sorry should have been more clear. The side fairings are just the small factory ones on the FXR. The reason im selling the top fairing seperately
is people wanted to cut them down into number boards. Im also doing sharper prices to people who have purchased from me before or want a front fairing/tail section combo. Cheers.

[Pumba]

TZ 50 Bucket Racer Project (http://www.trademe.co.nz/Browse/Listing.aspx?id=226013437)

[quallman1234]

KX125 Pipe 08 Model 20$

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Exhaust/auction-226726353.htm

[Buckets4Me]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Wheels/auction-227356939.htm

[Buckets4Me]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-226999719.htm

cb150

[Buckets4Me]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-229232177.htm

for all those that dont want an FXR try this instead

[Pumba]

Anyone after a project? Aprilia RS50 (http://www.trademe.co.nz/Browse/Listing.aspx?id=230948088)

[nudemetalz]

I procured a bunch of bodywork for an RGV 150 (air-cooled one).
I'm keeping the fairing and tank (which I really wanted) but have a set of side panels in good nick if anyone wants them (ie $0.00). They are yellow though.

[speedpro]

She's a roughy but . . . .

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Classic-vintage/auction-232920023.htm

[Kickaha]

I've got a pair of wheels from a FZR250

front 2.5 x 17, no disc, bearings or spacer

rear 3.5 x 17, it has a disc and sprocket carrier but no bearings or spacer

they owe me $150 so thats what I want for them

SOLD

[hmurphy]

Ooops ignore this post

[Bert]

fxr frame and rear wheel.
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Frames/auction-234104265.htm

and

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Frames/auction-233654543.htm

[Slingshot]

and

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Frames/auction-233654543.htm


This guy has lots of cool motorbike stuff for sale...check out all of his other listings (http://www.trademe.co.nz/Members/Listings.aspx?member=84065). He must be a choice kind of guy!

[nudemetalz]

Yes, I've heard he's a cool guy, rides crazy down the motorway though in peak-hour traffic, nothing that a good Guzzi rider can't take care of though... ;)

[Shorty_925]

I have the following for sale:

GL145 - standard trim (REGO on hold), $1200
RG50 - standard trim, $800

And the following tyres for sale:

Bridgestone 110x80 - $150
Bridgestone 150x80 - $150

Send me a PM if you want/need any further details.

[SHELRACING]

Tidy looking CB125 twin

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-234320710.htm

[DELLORTO]

Tidy looking CB125 twin

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Other/auction-234320710.htm

i want that bike sooooooo much!!!

[TZ350]

.

Had a bit of a disappointment with bidding on something from JawaJoe. http://www.trademe.co.nz/Browse/List...x?id=232164527

I had wanted some spares for my Motorcrosser and bid for two sets of gears and a reed assembly.

The first picture is JawJoes auction and the second picture is what I received.

I asked about the condition of the gears and was assured they were fine.

I placed my bid and duly received one set of mangy gears and no reed valve.

I rang him about it and the tenure of his reply was "whinge, whinge, shop else where as old joe takes no prisoners"

If you received less than was pictured and described in the auction would you feel ripped off? I do.

He has eight red faces, three blue and many not completed sales, I should have checked before dealing with him, silly me.

If your buying from Trademe I suggest you give JawaJoe a skip.

.


If your shopping for parts, it looks like JawaJoe is someone to avoid.

.

[nudemetalz]

I bought this off Slingshot with the idea to transfer all my running gear across but figured it would be too much work for me so am going to sell it again.

Great opportunity to make a trick bucket from.

Sell for $50.00

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Frames/auction-239507530.htm

[Dave-]

FXR150 DIGITAL DASH
http://www.kiwibiker.co.nz/forums/showthread.php?t=104834

$100

[RMS eng]

need to clear out some of my Castrol oils.

4 STROKE oil
4T 15-40 4 L 2 for $60.00 or 1 for $32.00ea
4T 15-40 1L 2 for $20.00

Power1 GPS 10-50 1L 2 for $30.00

2 STROKE oil

Power 1 TTS 1L 2 for $42.00

R30 Castor 1L $19.00 ea

chain oil spray can 2 for $20.00

while stocks last,phone CHRIS 09 817-9500 or aileenl@free.net.nz

[ajturbo]

I bought this off Slingshot with the idea to transfer all my running gear across but figured it would be too much work for me so am going to sell it again.

Great opportunity to make a trick bucket from.

Sell for $50.00

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Frames/auction-239507530.htm
could we get the GT into that????

[SHELRACING]

could we get the GT into that????

Would make a great project, shouldn't have any trouble wedging the Twin motor in a frame like that.

[nudemetalz]

My bucket is up for sale .... :crybaby:

http://www.kiwibiker.co.nz/forums/newthread.php?do=postthread&f=18

[Pumba]

SDR200 Frame

Would make a cool bucket frame

http://www.trademe.co.nz/Browse/Listing.aspx?id=245154494

[ajturbo]

SDR200 Frame

Would make a cool bucket frame

http://www.trademe.co.nz/Browse/Listing.aspx?id=245154494
don't think the seat looks very comfy

[F5 Dave]

Those frames are surprisingly heavy, but I think it the linkage stuff that could be replicated in ally & no worse than many other 250s. Would be stiff & easy to mount virtually anything in. With discs on the wheels that isn't too bad if they are the right sizes.

[jasonu]

Front end looks a bit rakey and that is not all that easy (cheap) to fix

[Rick 52]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Tyres/auction-245145383.htm

New wets bit flash for buckets

[mossy1200]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Tyres/auction-245145383.htm

New wets bit flash for buckets

You have to love $400 no reserve along with make an offer.The wise man offers less,the impatient man pays $400 and the noob pays more.LOL

[Billy]

I have a Bosson racepipe for sale $200.00,Has a small dent underneath otherwise in good condition

[ryanf062]

For salehttp://www.kiwibiker.co.nz/forums/showthread.php?t=109439
Photos in link

Honda crm80 front forks including brake caliper and master cylinder.
Honda crm80 rear shock.
Honda crm80 swing arm.
Honda crm80 fuel tank, cap, tap, and radiator.
Honda cg125(i think) frame.
Honda Gl145 2x fuel tanks.

OFFERS

[Pumba]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Tyres/auction-245145383.htm

New wets bit flash for buckets


You have to love $400 no reserve along with make an offer.The wise man offers less,the impatient man pays $400 and the noob pays more.LOL

Yea those of been on trade me for months. Made an offer ages ago, lowest he will go is $390

[ryanf062]

For salehttp://www.kiwibiker.co.nz/forums/showthread.php?t=109439
Photos in link

Honda crm80 front forks including brake caliper and master cylinder.
Honda crm80 rear shock.
Honda crm80 swing arm.
Honda crm80 fuel tank, cap, tap, and radiator.
Honda cg125(i think) frame.
Honda Gl145 2x fuel tanks.

OFFERS

No interest in these bits then?
What about an rs125 fairing

[Schrgd]

No interest in these bits then?
What about an rs125 fairing




How much? any photo's? :niceone:

[timg]

Anybody want some wheels for their FXR or bucket?

http://www.trademe.co.nz/Browse/Listing.aspx?id=247228525
http://www.trademe.co.nz/Browse/Listing.aspx?id=247229987
http://www.trademe.co.nz/Browse/Listing.aspx?id=247230883

[ryanf062]

No interest in these bits then?
What about an rs125 fairing




How much? any photo's? :niceone:

its on trademe
http://www.trademe.co.nz/Browse/Listing.aspx?id=247168125

[gav]

Awesome FXR150 racer ready to roll!
http://www.trademe.co.nz/Browse/Listing.aspx?id=248362778&ed=true

[Trudes]

Looks mean!!! Good price too

[Muzzab]

Anybody want some wheels for their FXR or bucket?

http://www.trademe.co.nz/Browse/Listing.aspx?id=247228525
http://www.trademe.co.nz/Browse/Listing.aspx?id=247229987
http://www.trademe.co.nz/Browse/Listing.aspx?id=247230883

Hey Tim,

What size are the FXR wheels?

Cheers Muzza

[Muzzab]

Awesome FXR150 racer ready to roll!
http://www.trademe.co.nz/Browse/Listing.aspx?id=248362778&ed=true

Wish I hadn't seen that!! Talk about going over to the dark side!!
Looks like an angry insect on P :headbang:

Cheers
Muzza

[timg]

Hey Tim,

What size are the FXR wheels?

Cheers Muzza

Hiya

Front 1.85 X 17
Rear 2.15 X 17

Cheers.

[Bren_chch]

Wish I hadn't seen that!! Talk about going over to the dark side!!
Looks like an angry insect on P :headbang:

Cheers
Muzza


I think its got your name on it! :2thumbsup

[Muzzab]

I think its got your name on it! :2thumbsup


Hhhhhmmmmmm..........as much as I'd like to, I'd need to sell TP and my scooter
and a couple of kids and hide it from the Mrs........so not likely this side of Christmas.:weep:

[Bren_chch]

Lucky i only used a pencil! :cool:

[gav]

Almost too tidy to race? Nahhhhh, cheap CB125T right here!
http://www.trademe.co.nz/a.aspx?id=249245560

[Schrgd]

http://www.trademe.co.nz/a.aspx?id=249245560


What a minter!!!

[F5 Dave]

Hmm, yeah I thought so too. Look closer. Every nut & bolt is rusty. Amazing what a amount of silicone spray or Armoural will do to half ok paintwork (check out bottom of tank thou).

Notice that the front tyre looks shiny? Scary!


Why does the front-on pic look so on-the-piss? Ground doesn't look that uneven. . .

[Schrgd]

Hmm, yeah I thought so too. Look closer. Every nut & bolt is rusty. Amazing what a amount of silicone spray or Armoural will do to half ok paintwork (check out bottom of tank thou).

Notice that the front tyre looks shiny? Scary!


Why does the front-on pic look so on-the-piss? Ground doesn't look that uneven. . .

My Bad

You're right Dave on much closer inspection it doesn't look that mint at all!!
I should of said " The blue parts look mint ":lol:

[F5 Dave]

Rep Bling for spelling 'you're' correctly. So rare on these forums.

[Rick 52]

Could be a good bike Tidy but not that fast ?
http://www.trademe.co.nz/a.aspx?id=250966666

[Bert]

PROJECT?
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Other/auction-251102426.htm

[Buckets4Me]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-251312365.htm

fxr motor

[Pumba]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-251312365.htm

fxr motor

:Oi: dont advertise that, bloody hell, how am I ment to pick up a bargin now:crybaby:

Must be about time team ESE invested in a dyno http://www.trademe.co.nz/Browse/Listing.aspx?id=251081862 :whistle:

[bucketracer]

.

GP125.......http://www.trademe.co.nz/Browse/Listing.aspx?id=251401631

.

[Skunk]

I have three swingarms to give away. One is the braced one from my AX100 (mono shock conversion), one a Suzuki Full Floater off something small - converted for a different mono shock set-up and an all alloy swingarm (monoshock).

[Henk]

Damaged FXR for sale at turners

http://www.turners.co.nz/Damaged/Pages/Car.aspx?RefId=688598

[Schrgd]

Does anyone have one of these they are willing to part with??
I know they can be straightened with resonable success but want a spare just in case I break it.

Just occurred to me I have done the left-right swap to lower bars so that will be a right hand clip on i'll need.

Any help would be great!!

Thanks All

[woodyracer]

if you cant get one second hand you can get decent set from

www.rapidartnz.com he's a hamilton based maker of clip-ons, go on there and he makes them for $200, he'll get them to you very quick also. -Max

[Buddha#81]

Does anyone have one of these they are willing to part with??
I know they can be straightened with resonable success but want a spare just in case I break it.

Just occurred to me I have done the left-right swap to lower bars so that will be a right hand clip on i'll need.

Any help would be great!!

Thanks All

Try brenchch at fxr.co.nz for these cheap and good http://www.motorbikeparts.co.nz/product_details.php?category_id=2&sub_category_id=22&product_id=670

[bucketracer]

.

For those who just have to have a 4-smoker, two CB125T's and a pile of bits for bucket racing.

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Other/auction-259992789.htm

.

[Skunk]

I have three swingarms to give away. One is the braced one from my AX100 (mono shock conversion), one a Suzuki Full Floater off something small - converted for a different mono shock set-up and an all alloy swingarm (monoshock).
Only one left now - the lightest of the lot. It's the big looking alloy one (it's not really that big).

[Yow Ling]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-262363186.htm

Same as wot won TRRS !!!!

One bid and no more buy now.

[Kickaha]

Big bore CB125 kits, cheap as chips
http://cgi.ebay.co.uk/HONDA-CB150T-125-CM150-CA150-cylinder-Pistons-big-bore_W0QQitemZ270504099104QQcmdZViewItemQQptZUK_Mo torcycle_Parts?hash=item3efb4cfd20

[k14]

I have a pre 95 RS125 swingarm that I had grand plans but never got round to using. I paid $50 for it and if someone wants it they can have it for that. I'm coming up to chch next week so can bring it, otherwise I can courier.

[VTRRR]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-262363186.htm

Same as wot won TRRS !!!!

One bid and no more buy now.

I was looking at that one, but the wife said no, i got to many bikes now. 4 is not to many is it?

[Skunk]

4 is not to many is it?No, I've got 9 and that's after selling/clearing out some.

[F5 Dave]

I was looking at that one, but the wife said no, i got to many bikes now. 4 is not to many is it? As of last week I'm down to 8, which is more than one per day of the week, but one needs a spare doesn't one? So you don't have a mate that could keep one of the bikes you don't use all the time? As long as you swap around one that is the same colour it will be ok. What? - she doesn't know how much play money you have does she? Oh dear Oh dear Oh dear :pinch:

[bucketracer]

.

This must have been an old Bucket engine?????????/

http://www.trademe.co.nz/Browse/Listing.aspx?id=263610083

-Honda XR200 bottom end (6 speed)
-Crank destroked
-VT250 Piston
-VT250 4 valve water cooled head
-125cc displacement
-Custom grind camshafts plus std ones
-Resurfaced and ground rockers
-30mm dellorto carb
-Custom water pump
-custom radiator
-Custom moulded intake manifolds

Someone has to buy this and get it out there again........................................

.

[Kickaha]

.
This must have been an old Bucket engine?????????/
.

I think that was Peter Lamberts old one, he didn't ever race it and it was sold on trademe a year or two ago unfinished, Oyster has a motor the same in a homebuilt monocoque chassis

[Bert]

cheap as chips:
http://www.trademe.co.nz/Browse/Listing.aspx?id=264889160
normally $25 up here.

[spec*weapon]

.

Someone has to buy this and get it out there again........................................

.

I've just bought this motor, hoping to fit it into a cr125 frame.

Does anyone know anything about it or similar motors?

Can't wait to check it out.

[Scotty595]

Looks like a pretty good set up. Let us know how it goes

[Kickaha]

Oyster on here has one, which I think when we last saw it out it was winning the Hokitika street race several years back, he would be the man to talk to

[bucketracer]

.

A Kawasaki KE100 http://www.trademe.co.nz/Browse/Listing.aspx?id=266670338

.

[Bert]

Might be useful

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Complete-engines/auction-267613354.htm

[bucketracer]

FXR150 Turners damaged vehical auction CHCH:- http://www.turners.co.nz/Damaged/Pages/Car.aspx?RefId=731153

.

[Slingshot]

Frankie is now on the market!

Crazy $1 Reserve - click the pic to get to TradeMe.

<img src="http://images.trademe.co.nz/photoserver/tq/17/119117117.jpg"></img> (http://www.trademe.co.nz/Browse/Listing.aspx?id=269755501&ed=true)

[Kendog]

Crazy $1 Reserve
That is crazy, especially with the leavers, clip ons etc on the bike.
I might have to buy it.

[Slingshot]

That is crazy, especially with the leavers, clip ons etc on the bike.
I might have to buy it.

You forgot to mention it's racing pedigree :)

[Kendog]

You forgot to mention it's racing pedigree :)
Good point, but a lot of that was it's quality rider.
How is the next bucket progressing?

[jasonu]

hgjigeryh6u4ttr35y45y3

[Scotty595]

Frankie is now on the market!

Crazy $1 Reserve - click the pic to get to TradeMe.

<img src="http://images.trademe.co.nz/photoserver/tq/17/119117117.jpg"></img> (http://www.trademe.co.nz/Browse/Listing.aspx?id=269755501&ed=true)

Is anyone coming up to auckland soon with a van and space in the back? (if i decide to bid and win)

[Scotty595]

http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Sports/auction-271488108.htm

FXR150

[racefactory]

Honda GL145

Bike is all complete and goes except for a front brake caliper (included) which will need to be fitted.

Comes with spare wheel, brake disc, brake caliper, spare forks.

Rego on hold and WOF expired. $600