Bucket bits 4 sale

[cotswold]

I have a mate with a GL 145 he wants to sell,

Rego is dead so good for bits or a bucket, he is after offers over $300

[mossy1200]

I need a complete bike prefer fxr150 in welly area. PM me if you see one for sale thanks

[Yow Ling]

I need a complete bike prefer fxr150 in welly area. PM me if you see one for sale thanks

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-471049739.htm

ring her and offer a grand usually works

[mossy1200]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-471049739.htm

ring her and offer a grand usually works

yeah its on my watch list I was going to bid to 850odd allowing for the fact I need freight it and it may stay low with no warrent etc.
It a long drive to take van to Auckland maybe $200 petrol. One tank almost got me to hampton when I was racing posties in my van.

[Kickaha]

yeah its on my watch list I was going to bid to 850odd allowing for the fact I need freight it and it may stay low with no warrent etc.
It a long drive to take van to Auckland maybe $200 petrol. One tank almost got me to hampton when I was racing posties in my van.

If it's going fly up and ride it down or find someone coming to Manfield for racing to bring it down to Fielding

[mossy1200]

If it's going fly up and ride it down or find someone coming to Manfield for racing to bring it down to Fielding

Its got no rego or warrent and im the unlucky type get pulled over riding it back 3 times or more.
If im going to offer her money outside tardme I really need someone I trust to transfer cash to and get them to collect it for a sum of beers.
I dont like the thought of sending someone I dont know money for a bike outside of trade me auction. i may end up with no bike.
Maybe drive up road trip if I cant find someone from KB to collect it or bid and get biketrans pick it up.

[Dutchee]

Its got no rego or warrent and im the unlucky type get pulled over riding it back 3 times or more.
If im going to offer her money outside tardme I really need someone I trust to transfer cash to and get them to collect it for a sum of beers.
I dont like the thought of sending someone I dont know money for a bike outside of trade me auction. i may end up with no bike.
Maybe drive up road trip if I cant find someone from KB to collect it or bid and get biketrans pick it up.

One of the bidders is a bucketeer, not sure about the other though.

[mossy1200]

One of the bidders is a bucketeer, not sure about the other though.

yeah I texted her and she wont sell out other than in the auction but is willing to wait for collection the following weekend(road trip) but im thinking its going to get alot dearer yet.

I have my eye on a 250 rolling chasis so maybe ill home build and wait for a smashed fxr for engine or a good aircooled 125 2t.

3 weeks ago I tried riding the MT with my race leathers and helmet and im hooked again. Bloody race bug.

[Henk]

and im hooked again. Bloody race bug.

guy we know up here recons racing is worse than Heroin.

Just as addictive
Damn near as expensive
Slightly more socially acceptable so you don't get the societal pressure to quit

[cotswold]

guy we know up here recons racing is worse than Heroin.

Just as addictive
Damn near as expensive
Slightly more socially acceptable so you don't get the societal pressure to quit

I have a temporary cure, I married it, the cure lasted 17 years, was reinfected by a bastard with a bucket.:shit:

[husaberg]

I have a temporary cure, I married it, the cure lasted 17 years, .:shit:

The cure shouldn't be worse than the disease though, should it:eek:
I understand your remedy can also be an effective cure for excess finance situations as well:shifty:

[cotswold]

The cure shouldn't be worse than the disease though, should it:eek:
I understand your remedy can also be an effective cure for excess finance situations as well:shifty:

The cure does come at quite a high cost but I have been instructed to say was worth it

[husaberg]

The cure does come at quite a high cost but I have been instructed to say was worth it


Even free will comes with a cost i guess :msn-wink:

[cotswold]

Even free will comes with a cost i guess :msn-wink:

I have heard of that free will stuff can you buy it?

[husaberg]

I have heard of that free will stuff can you buy it?


Oh totally for sure.
First take all the assets you have divide in two. Then do the same with your paycheck as well if you have young'ns
While you are at it give your self a penilectomy with a pair off side cutters. That way at least you will get the satisfaction of beating her to it.
Even then I guess it is possibly still cheaper than your cure.
The only downside i can see is, you wont get to talk about your feelings as much.:laugh:

[cotswold]

Oh totally for sure.
First take all the assets you have divide in two. Then do the same with your paycheck as well if you have young'ns
While you are at it give your self a penilectomy with a pair off side cutters. That way at least you will get the satisfaction of beating her to it.
Even then I guess it is possibly still cheaper than your cure.
The only downside i can see is, you wont get to talk about your feelings as much.:laugh:

:laugh::laugh::laugh::laugh::laugh::laugh::laugh:: laugh:

[Timber020]

A "hidden" trade me auction for an FXR150. Its under toys ffs. and with 17 hours to go, its met reserve at $30. I was going to bid on it but im not worthy


Good luck in the competition bucketeers

471304122

[Moooools]

Oh wow look. A distraction.

[Moooools]

Two distractions!

[Moooools]

Look at all them distractions

[Moooools]

Maybe just one more

[ajturbo]

A "hidden" trade me auction for an FXR150. Its under toys ffs. and with 17 hours to go, its met reserve at $30. I was going to bid on it but im not worthy


Good luck in the competition bucketeers

471304122

thanks..........

[F5 Dave]

RS shock, & muffler & rad. Bit of a bargain as a package + a nifty front guard. I'll take that as a finders fee.

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-472224803.htm

[husaberg]

RS shock, & muffler & rad. Bit of a bargain as a package + a nifty front guard. I'll take that as a finders fee.

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-472224803.htm

interesting in the Rad myself. So past my limit (already got an RS shock)

I think Bert wanted the gauges?

Do we let an Aussie win (Top bidder is an Aussie) Who bloody well won the War :innocent:

Co-op buy in?

Kel might want the Shock to go with his Forks?

[kel]

interesting in the Rad myself. So past my limit (already got an RS shock)

I think Bert wanted the gauges?

Do we let an Aussie win (Top bidder is an Aussie) Who bloody well won the War :innocent:

Co-op buy in?

Kel might want the Shock to go with his Forks?

I want the front guard

[F5 Dave]

That was supposed to be my finders fee. That said I have 2 already & it isn't carbon now I look closer.

[Farmaken]

I am keen on the muffler, also happy to pick up said collection of bits and bobs and distribute as required

Cheers Ken

[F5 Dave]

Might be worth the punt but it runs out this time tomorrow.


btw I don't need any of this stuff, I just posted it.

[kel]

Well lets try and agree some numbers then place a bid

$40 is nice round number to work with;
radiator $40 - Husaberg
guard $40 - Kel
shock $40 - Myself or the ESE boys will take this
muffler $40 - Farmaken
gauges,footpeg bracket, chain, brake hose and misc $40
So who wants the gauges and other bits? If we have a taker we'd have $200 which should be enough?
Auction closes tomorrow afternoon.


I see Dave Diprose is also watching the auction

[TZ350]

Well lets try and agree some numbers then place a bid
shock $40 - Myself or the ESE boys will take this

gauges,footpeg bracket, chain, brake hose and misc $40
So who wants the gauges and other bits? If we have a taker we'd have $200 which should be enough?
Auction closes tomorrow afternoon.


I see Dave Diprose is also watching the auction

If its available Team ESE will take the Shock for $40. And I will kick in $40 for the gauges, footrests brackets etc.

[F5 Dave]

Ahh, so I'm being cut out of the finder fee, right, I'll txt Dipi & arrange a counter bidding war. I'm after the worn out chain & spongy brake lines:shifty:.

[Farmaken]

Well lets try and agree some numbers then place a bid

$40 is nice round number to work with;
radiator $40 - Husaberg
guard $40 - Kel
shock $40 - Myself or the ESE boys will take this
muffler $40 - Farmaken
gauges,footpeg bracket, chain, brake hose and misc $40
So who wants the gauges and other bits? If we have a taker we'd have $200 which should be enough?
Auction closes tomorrow afternoon.


I see Dave Diprose is also watching the auction

$40 sounds good to me, who is doing the bidding ??

[husaberg]

Well lets try and agree some numbers then place a bid

$40 is nice round number to work with;
radiator $40 - Husaberg
guard $40 - Kel
shock $40 - Myself or the ESE boys will take this
muffler $40 - Farmaken
gauges,footpeg bracket, chain, brake hose and misc $40
So who wants the gauges and other bits? If we have a taker we'd have $200 which should be enough?
Auction closes tomorrow afternoon.


I see Dave Diprose is also watching the auction

Husaberg is keen for his part happy to go over 50% of you estimate ie up to $80 for the rad if ness.

Yeah happy for Dave to have the chain too.:laugh:
if he has a look at the bidder's i think he will notice someone he reconises from the Jimmy Hoffa where a bouts auction he ran.:innocent:

Who is doing the bidding?

[Farmaken]

I am happy to bid and collect should we be successful, just need green lights from all concerned

[husaberg]

Husaberg is keen for his part happy to go over 50% of you estimate ie up to $80 for the rad if ness.

Yeah happy for Dave to have the chain too.:laugh:
if he has a look at the bidder's i think he will notice someone he reconises from the Jimmy Hoffa where a bouts auction he ran.:innocent:

Who is doing the bidding?


Oh well it looks like it is me doing the bidding then!

[mossy1200]

Big thanks to HENK fo putting me onto my new ride. It was advertised in the Jackets and Pants section and I never would have seen it.

Also i notice the fxr150 in Auckland has been offered for $1400 as the bidder with zero feed back that won it either was a alt or a time waster.

http://www.trademe.co.nz/Browse/Listing.aspx?id=471049739

Low km one that it was.

[Farmaken]

Oh well it looks like it is me doing the bidding then!

Fire away Husa

[kel]

Oh well it looks like it is me doing the bidding then!
Have you bid? If not I'll do it as I sit in front of this machine all day anyways. Don't want to bid against ourselves.

[Yow Ling]

Have you bid? If not I'll do it as I sit in front of this machine all day anyways. Don't want to bid against ourselves.


You guys are bidding against each other , husapedia is sylvia

[F5 Dave]

I'm tempted to bid just for the humour value.:laugh:

[kel]

You guys are bidding against each other , husapedia is sylvia

:facepalm:
So he's been bidding since the start then, cheeky bugger.

[Farmaken]

:facepalm::facepalm::facepalm:

[kel]

:facepalm::facepalm::facepalm:

Dont worry Farmaken thus far I've only cost us $2.60 each.

[kel]

:killingme Trademe is great if you're a seller.

[F5 Dave]

Shows they are getting expensive & rare. I paid less than that for the same amount of bits for my RS RG50 conversion several years ago. Except I got a tank, swing arm, forks, a frame, fairing & a few other incidentals.

[Farmaken]

So, that worked out well:blink:

Was the winner Av`s Dad ??

[TZ350]

Was the winner Av`s Dad ??

No it was Keith Robinson, his son was a good Bucket racer before moving on to 125GP.

Keith is a bit of a trader, who loves to do a deal.

He will have worked out how much he can get on Ebay or Trademe for the individual bits.

Its my bet (a chocolate fish) you will see the various items re appearing again one by one on Trademe before long.

Back in the day, it was never a problem to get a worn out pair of old slicks from him for top dollar.

[husaberg]

You guys are bidding against each other , husapedia is sylvia


Husapedia that is some funnyarse shit:laugh: Have you got someone ghost writing for you now Mike?:msn-wink: Were you the CHCH bidder?
I just did the autobid for the group i added $21 just in case and spent my time at work er.... working.


Shows they are getting expensive & rare. I paid less than that for the same amount of bits for my RS RG50 conversion several years ago. Except I got a tank, swing arm, forks, a frame, fairing & a few other incidentals.

Got frame swingarm forks and shock tank and a few incidentals $900 was glad to get it. yes they seem to be on the upward trend only 400 made per year so not that common.

Race supplies wanted considerably more.

Well lets try and agree some numbers then place a bid

$40 is nice round number to work with;
radiator $40 - Husaberg
guard $40 - Kel
shock $40 - Myself or the ESE boys will take this
muffler $40 - Farmaken
gauges,footpeg bracket, chain, brake hose and misc $40
So who wants the gauges and other bits? If we have a taker we'd have $200 which should be enough?
Auction closes tomorrow afternoon.


I see Dave Diprose is also watching the auction

10 tractors
:facepalm:
So he's been bidding since the start then, cheeky bugger.


RS shock, & muffler & rad. Bit of a bargain as a package + a nifty front guard. I'll take that as a finders fee.

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-472224803.htm

interesting in the Rad myself. So past my limit (already got an RS shock)

I think Bert wanted the gauges?

Do we let an Aussie win (Top bidder is an Aussie) Who bloody well won the War :innocent:

Co-op buy in?

Kel might want the Shock to go with his Forks?



Ahh, so I'm being cut out of the finder fee, right, I'll txt Dipi & arrange a counter bidding war. I'm after the worn out chain & spongy brake lines:shifty:.


Husaberg is keen for his part happy to go over 50% of you estimate ie up to $80 for the rad if ness.

Yeah happy for Dave to have the chain too.:laugh:
if he has a look at the bidder's i think he will notice someone he reconises from the Jimmy Hoffa where a bouts auction he ran.:innocent:

Who is doing the bidding?

Oh well it looks like it is me doing the bidding then!



Well it looks like we could not organise a piss up in a brewery let alone a gang bang in a brothel. But shit $400 is a bit OTT they could all be shagged like chain for all we know.

[Rick 52]

No it was Keith Robinson, his son was a good Bucket racer before moving on to 125GP.

Keith is a bit of a trader, who loves to do a deal.

He will have worked out how much he can get on Ebay or Trademe for the individual bits.

Its my bet (a chocolate fish) you will see the various items re appearing again one by one on Trademe before long.

Back in the day, it was never a problem to get a worn out pair of old slicks from him for top dollar.

Yes he got me hook line and sinker for my worm out RS bits,The bloke is a bloody sharp dealer !!

[husaberg]

Find four people to go in for these I guess they would be the perfect carb on a full house 150 Bucket.

Not often seen FCR32 Downdrafts Also great (with work apparently) on a two stroke.

http://http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/performance/auction-473493519.htm (http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/performance/auction-473493519.htm)

http://images.trademe.co.nz/photoserver/tq/94/215330094.jpghttp://images.trademe.co.nz/photoserver/tq/84/215330484.jpghttp://images.trademe.co.nz/photoserver/tq/1/215330201.jpg

[Clivoris]

Find four people to go in for these I guess they would be the perfect carb on a full house 150 Bucket.



No can findee

[Clivoris]

Hahaha. Those were on my old CBR400RR. I'm not generally prone to exaggeration, but I fully expect that if they are purchased and seperated like quadtuplets shafted by an insensitive orphanage; the purchasers will be cursed with minipenisitis and bumwartyness.

[husaberg]

Hahaha. the purchasers will be cursed with minipenisitis and bumwartyness.

So you agree they would be perfect upgrade as it were for a FXR150 rider then.
http://25.media.tumblr.com/tumblr_lsyifm2Bbz1qgdfcno1_500.jpg

[Clivoris]

So you agree they would be perfect upgrade as it were for a FXR150 rider then.

LMFAO. I have nothing against FXR riders. I even have some as friends.

[husaberg]

LMFAO. I have nothing against FXR riders. I even have some as friends.

Yeah know i can understand that. Its like the pretty girl who always surrounds herself with the ugly friends. its clever in that it makes them look hotter as a result:msn-wink:

http://allwomenstalk.com/wp-content/thumbs/25/652.jpghttp://media.fakeposters.com/results/2011/11/24/3w8n8yxjy6.jpg
http://i286.photobucket.com/albums/ll107/fivehole84/zobbp.gif

[Henk]

So what you are saying is us FXR riders are better looking and even cooler for hanging out with two stroke mechanics right?

[husaberg]

So what you are saying is us FXR riders are better looking and even cooler for hanging out with two stroke mechanics right?

The reason I run diesels, even though I love two strokes, Is that I don't have the time or talent .... Someone commented to me a while back that I need to find a pit bitch, instead of being one.


Yeah that's must be, er....exactly what i am saying :laugh:
http://4.bp.blogspot.com/-kls7dRpMkJc/TmhLR2kumpI/AAAAAAAAAMU/KKiYPTb1Py0/s400/explain%2Bunderstand.jpghttp://www.rounds.com/blog/wp-content/uploads/2011/04/want-to-feel-thin-THAN-hang-out-with-fat-ppl.jpg

[Henk]

Looks like Lewis is selling his ax bucket

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-474938112.htm

Be a good cheap starter bike

[chrisc]

I know this is the bucket bits for sale section but anyone that is looking for GL145 road bits give me a message. I have one that's getting turned into a bucket and I don't need side covers, headlights, gauges bla bla etc. Message me!

[mossy1200]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-475944904.htm

Think hes keen to sell. Maybe someone could squeeze it for 1100-1200

[Drew]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-475944904.htm

Think hes keen to sell. Maybe someone could squeeze it for 1100-1200

It's a woman bro.

[F5 Dave]

What makes you so sure? Perhaps the user name contains a hint?:confused:

[Buckets4Me]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/tyres/auction-475394877.htm

brand new rear slicks

[Buckets4Me]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-475583437.htm

rolling frame mc16 CHEAP!

[mossy1200]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-474883360.htm

[husaberg]

http://www.trademe.co.nz/business-farming-industry/farming-forestry/other/auction-475250960.htm
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/tyres/auction-475394877.htm

brand new rear slicks

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-475583437.htm

rolling frame mc16 CHEAP!
Rollling chassis inc tires (slicks and wets) maybe just the thing for Taupo?
Could be a little heavy though?

http://www.trademe.co.nz/business-farming-industry/farming-forestry/other/auction-475250960.htm

[F5 Dave]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-474883360.htm
as it sez; Happy bidding! unhappy winning.

[Drew]

Twosmoker from here, has a good tidy FXR for sale. Offers over a grand. Pm his arse, he might respond.

I can't remember last time I saw a post on here, so maybe PM him on facebook.

[Drew]

Chris Susich

[F5 Dave]

Here's a nice Honda 100. But geeze some people can be such kunts, what a nasty question.

http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-473719542.htm

[F5 Dave]

actually here is a nice one

http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-475574569.htm

[husaberg]

actually here is a nice one

http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-475574569.htm

Quick lets rip it to bits then:lol:

Yes it is real tidy though.

[Bert]

Second hand RS125 fairings:
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/fairing/auction-476893355.htm
same guy has some slicks and wets...

[gav]

Second hand RS125 fairings:
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/fairing/auction-476893355.htm
same guy has some slicks and wets...
Yep, and you'd be buying off the current NZ 125GP champ, Seth Devereux!

[cotswold]

Here's a nice wheel that if I were flush I would be buying


http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=190678466461&ssPageName=ADME:B:WNA:US:1123

[Pumba]

Here's a nice wheel that if I were flush I would be buying


http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=190678466461&ssPageName=ADME:B:WNA:US:1123

Thats predy. Worth buying just to sit in the lounge as a piece of art

[jasonu]

Hey you RS125 chassis and or rear wheel users I have for sale rear aluminium sprockets sizes from 35 t to 48 t.
Some are 420 (same pitch as 415 but a bit thicker) and some are 415.
Many are brand new and some are lightly used
Price is $70USD each including freight to NZ.

Email jasonulyatt.1@msn.com

[kel]

Price is $70USD including freight to NZ.
[/email]

$70US for how many? They're only about $40NZ each in 420 pitch.

[F5 Dave]

I just bought a rear rim for my spoked wets from Torpedo7 on special (front motard rim) for $149 3.5" 17. Now just have to hope it fits in the swingarm ok.

http://www.torpedo7.co.nz/products/T7RIRN0S1/title/torpedo7-sm-rim-3-50x17--7116-

[jasonu]

They're only about $40NZ each in 420 pitch.

Mine are nicer

[kel]

Going by your clipons, your'e probably right.

[jasonu]

Going by your clipons, your'e probably right.

Thank you (I think...):confused:

[husaberg]

I just bought a rear rim for my spoked wets from Torpedo7 on special (front motard rim) for $149 3.5" 17. Now just have to hope it fits in the swingarm ok.

http://www.torpedo7.co.nz/products/T7RIRN0S1/title/torpedo7-sm-rim-3-50x17--7116-


You should be able to fit it in ok as you can vary the offset. nice price too the ones to fir the hubs i was going to use were bloody dear.
From memory the early Goldwings had a full 17x2.5 rim in 36 spoke of course (Gee i wonder how heavy it was) the 2.15x17 are a lot more common. Various early XR200 and i think XL250 rc/rd and probably XT250 and no doubt a lot other other Road Trails.

[mossy1200]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-477260050.htm
interesting

[F5 Dave]

You should be able to fit it in ok as you can vary the offset. nice price too the ones to fir the hubs i was going to use were bloody dear.
From memory the early Goldwings had a full 17x2.5 rim in 36 spoke of course (Gee i wonder how heavy it was) the 2.15x17 are a lot more common. Various early XR200 and i think XL250 rc/rd and probably XT250 and no doubt a lot other other Road Trails.

Yeah old XRs are 17, but in 1.85. I have a wet set with 1.85 front & 2.15 rear. ok for front wets only & front is pinched. I'll sling the back on the front & use the new rim on the back. And maybe sell the 1.85 to an XR200 owner. I've replaced a delaminating original on a mates old one so they do die.

[Bert]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-477260050.htm
interesting

My God; my first ever bucket!! :shit::facepalm:

[husaberg]

Yeah old XRs are 17, but in 1.85. I have a wet set with 1.85 front & 2.15 rear. ok for front wets only & front is pinched. I'll sling the back on the front & use the new rim on the back. And maybe sell the 1.85 to an XR200 owner. I've replaced a delaminating original on a mates old one so they do die.

Yeah you are right on the money there Dave about the XR200 being only 1.85x17. The XL250 of around 83-85 posibly later and i guess the 500 as well did have the 2.15x17 though the parts fiche confirmed this the (xl250)where my memory was playing tricks. Funny enough i seem to remember the XR200 getting around with 5.10 tires on them.

[Moooools]

Super fast FXR 150.
He says the sop speed is 180km/hr. Must be the tokyo drift special edition with pod filter and blow off valve. Maybe even some chrome valve caps.

http://www.trademe.co.nz/Browse/Listing.aspx?id=476622125

[speights_bud]

Turbo project.... Go oonnn!! :facepalm:
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-477475270.htm

[goivy26]

Full set, front and rear wheels for FXR150. Discs, sprockets & carrier spacers etc.

Good condition.

$160.00 ono

Call or Txt Ivan
021 02586178

[mossy1200]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-477584043.htm

[mossy1200]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-478442774.htm

FXR is getting cheaper maybe a 1k offer with no warrent and rego would get it.

[chrisc]

Another FXR150 - $1100 from Napier

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-479715639.htm

[cotswold]

http://www.trademe.co.nz/a.aspx?id=479953568


Gp 125 motor

[Pumba]

Thought I would throw them up on here to see if any one wants them. I have for sale very first parts that i bought off trade, a set of FZR Rims, pretty sure they are the 1KT model, 2.15x17 front 2.75x17 rear. Plan was to put them on the RX125 I started with, but I get feed up with spending more time pushing it around the pits than riding it, so these rims were never fitted.

They come with disks and sprocket carrier.

They are now odd balls in my collection of parts as everything else is Suzuki. I maybe being hopeful, but would happily swap for a set of GSXR250 rims. Otherwise make me an offer I cant refuse.

264376 264377

[John_H]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/performance/auction-481552427.htm

[mossy1200]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-482411910.htm

[Farmaken]

I have two of these GS 500 rims for sale with discs and hybrid suzuki/tzr/fzr sprocket carrier ( can use 520 or 428 chain/ sprockets )

$250 the pair. Cheers Ken264655264656

[husaberg]

It's a Honda need i say more.

I hear they go all right ask Mike.
http://www.trademe.co.nz/a.aspx?id=483295330

[mossy1200]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-483599792.htm

[F5 Dave]

Indeed, he commuted on one for a while.

$500 hit the buy now button!

[Shorty_925]

1 x FXR150 for sale
Anyone interested get in contact with me for more details.

What it looks like for them that dont know : https://picasaweb.google.com/108756888529105467491/Tokoroa110411#5594183627292385330

[crazy man]

1 x FXR150 for sale
Anyone interested get in contact with me for more details.

What it looks like for them that dont know : https://picasaweb.google.com/108756888529105467491/Tokoroa110411#5594183627292385330how much are you wanting for it?

[Shorty_925]

how much are you wanting for it?

Reply pm'd.

[mossy1200]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-483375470.htm

[husaberg]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-483375470.htm


Seems the seller is incapable of reading. Note the brand on the tank LOL

[mossy1200]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-484486093.htm

[F5 Dave]

Seems the seller is incapable of reading. Note the brand on the tank LOL
What a maroon!:facepalm:

"my son is keen to have a look do you think this would suit 11 year old? do you have price in mind <small> alyce121 (http://www.trademe.co.nz/Members/Listings.aspx?member=3927419) (18 (http://www.trademe.co.nz/Members/Feedback.aspx?member=3927419) http://www.trademe.co.nz/images/star10.gif (http://www.trademe.co.nz/Members/Feedback.aspx?member=3927419)) 5:02 pm, Mon 11 Jun </small> I don't even know if this goes <small class="NoWrapping"> 6:11 am, Wed 13 Jun "

yeah sure you don't.
</small>

[mossy1200]

Theres a chance if he couldnt find Kawazuki on the tank he might not know how to get the old honda going.

[koba]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-484486093.htm

That would really be worth a good look for someone with the mechanical inclination to develop it.

[mossy1200]

That would really be worth a good look for someone with the mechanical inclination to develop it.

Its the second one I have seen in last 2 weeks. At 15hp stock that engine worked could be fast. would need carb solution being a twin 2 smoke. One carb serving both or 2 17mm carbs to give same total as one larger carb.

[koba]

Its the second one i have seen in last 2 weeks. At 15hp stock that engine worked could be fast. would need carb solution being a twin 2 smoke. One carb serving both or 2 17mm carbs to give same total as one larger carb.

Very much so. A good bike to start with and fantastic potential for something super fast with some work.

[Arronduke]

FXR150 motor forsale... readyto go... $700

Goes good... fresh oil.
Need to pay for wifes bike....

cheers

[Arronduke]

sounds good.... the FXR motor... just what I need ....will you take $800?

[chrisc]

Someone might be interested in this:

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-484346429.htm

[Dutchee]

sounds good.... the FXR motor... just what I need ....will you take $800?
You're a muppet. Tell ya what, I'll give you $50 and it's all good :) hehehe

[husaberg]

2.5x17 and 3.5x17
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-485239085.htm

[Moooools]

Hamish needs to get these.

[F5 Dave]

yeah, but do you really want to buy something off a chap with the handle gdog69? I mean that sounds totally unsanitary.

[Shorty_925]

FXR up north http://www.trademe.co.nz/Browse/Listing.aspx?id=486589087

[gav]

FXR up north http://www.trademe.co.nz/Browse/Listing.aspx?id=486589087
Looks like a bargain that one! Not sure about those front number boards though ...

[mossy1200]

http://www.trademe.co.nz/Browse/Listing.aspx?id=485341721

345mm is the spec. its a little long for my bike but maybe someone might need that length.

[Pumba]

http://www.trademe.co.nz/Browse/Listing.aspx?id=485341721

345mm is the spec. its a little long for my bike but maybe someone might need that length.

Times are tough when you have to pawn your Ohlins:(

[mossy1200]

http://www.trademe.co.nz/a.asp?id=487819225&cc=602&pid=220192289&hbc=&ct=link

Relisted. That motor is taunting me.

[Shorty_925]

1 x FXR150 for sale
Anyone interested get in contact with me for more details.

What it looks like for them that dont know : https://picasaweb.google.com/108756888529105467491/Tokoroa110411#5594183627292385330

Up on trademe : http://www.trademe.co.nz/Browse/Listing.aspx?id=488447320

[gav]

Up on trademe : http://www.trademe.co.nz/Browse/Listing.aspx?id=488447320

$2000 !!?? :eek5:

[Shorty_925]

$2000 !!?? :eek5:

yes thats what Im selling it for. I'd hate to think of what it would cost on engine alone for a front running bike!

[mossy1200]

Sounds expensive but I think I have spent that already and its possible I dont even have 10hp yet. Hate to think what 30hp might cost me.

[husaberg]

Sounds expensive but I think I have spent that already and its possible I dont even have 10hp yet. Hate to think what 30hp might cost me.

PM me LOL...........

[mossy1200]

PM me LOL...........


Nah. You would take advantage of my wifes money or encourage me to spend it.
Ill build a motor after I learn how to ride.

[gav]

yes thats what Im selling it for. I'd hate to think of what it would cost on engine alone for a front running bike!
A carb and an exhaust .... looks to me like a $1200 bike, but hey good luck mate!

This one has similiar specs and is half the price with some spares ... http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-486589087.htm

[Shorty_925]

Sounds expensive but I think I have spent that already and its possible I dont even have 10hp yet. Hate to think what 30hp might cost me.

Top 3 costs are:
1. Bike
2. Wheels + Disc's + rear cush drive
3. Getting the spacers machined up. Im no engineer so its going to cost to get it done right.

If you look at the cost of a bike, plus what has been added and done to the bike, it adds up before you know it. It wouldnt be for sale if we were still racing locally.

[husaberg]

Nah. You would take advantage of my wifes money.
Ill build a motor after I learn how to ride.

Gee you make to much sense building a bike that handles then build a fast motor.

I hope mine has 35 but i an't building it myself, but don't expect any change out of $......0 I wish i was kidding.
it will be faster than me up i am over 90kg and over 30 years old

Regards Glenn

ps Gurls like rings get your self a wiesco piston and give her your old rings out of the bucket.:innocent:

[Yow Ling]

2k sounds alright, its a bargain if you are just starting out, if you buy a 500 dolla shitter and spend 500 then sell it for 500 you will be wishing you had just coughed the bit extra for the fxr. save yourself the heartache get the fxr.

cheap fxr 1200, wheels etc 500, zorst 150, seat 150, tyres 150

shorty isnt getting rich on this one

[mossy1200]

Gee you make to much sense building a bike that handles then build a fast motor.

I hope mine has 35 but i an't building it myself, but don't expect any change out of $......0 I wish i was kidding.
it will be faster than me up i am over 90kg and over 30 years old

Regards Glenn

ps Gurls like rings get your self a wiesco piston and give her your old rings out of the bucket.:innocent:

35ponies and your young and light. I can only wish to have your numbers.
I need big forks and shocks for my fat old arse and to stop my 40s love handlers from sending me around the track like a wee wibbles wobble that wont fall down.

[Kendog]

$2k is a fair price for a rare ready fxr like that. Not easy to build for less now.

[mossy1200]

$2k is a fair price for a rare ready fxr like that. Not easy to build for less now.

Be interesting to see how high this goes http://www.trademe.co.nz/Browse/Listing.aspx?id=486589087

[Kendog]

Be interesting to see how high this goes http://www.trademe.co.nz/Browse/Listing.aspx?id=486589087
Yep, total bargain at the moment.

[Muzzab]

2k sounds alright, its a bargain if you are just starting out, if you buy a 500 dolla shitter and spend 500 then sell it for 500 you will be wishing you had just coughed the bit extra for the fxr. save yourself the heartache get the fxr.

cheap fxr 1200, wheels etc 500, zorst 150, seat 150, tyres 150

shorty isnt getting rich on this one


I have to agree, the only reason I didn't buy a $2K FXR was getting the $$$ passed fun control, so I have spent nearly that much building the RGV/FXR but just not all in one go.....hee hee :0)

[kel]

Yep, total bargain at the moment.
Might bid on it myself, would make a cheap back up bike. Few mods like cams, porting, brake lines, decent slicks - hmm not sounding so cheap any more when you could buy my fully sorted FXR for $2k

[F5 Dave]

Didn't you use that to push the front of the field at Kaitoke last time you were here? Came ok in NI series yeah?

Still wouldn't pay $2k as its a horrible foul stroke, - though some people aren't as discerning.

[Rick 52]

Kel and Shorty bikes are good valve at $2000 both fast and reliable with good set ups ..

A side car starter with a F5 engine to sell on http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-487736498.htm

[mossy1200]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-489422170.htm

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-489081258.htm

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-488982747.htm

A couple of cbrs

[Henk]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-489422170.htm


From the post above, Max Lyvers old bike. A steal at 1500 Ono.

[cotswold]

I am after a pair of leathers to fit lady 5'10 and thin as a stick, these will most likely only get used 2 or 3 times so i don't want to spend a fortune. Thanks

[sidwyz]

I am after a pair of leathers to fit lady 5'10 and thin as a stick, these will most likely only get used 2 or 3 times so i don't want to spend a fortune. Thanks

$100 i've got some Shoo brand ones.

[mossy1200]

http://www.trademe.co.nz/Browse/Listing.aspx?id=487263465

Interesting 16inch tire. has anyone ever used one.

[mossy1200]

http://www.trademe.co.nz/Browse/Listing.aspx?id=487279394

I didnt expect that the wheel would reach 300 odd.

[husaberg]

http://www.trademe.co.nz/Browse/Listing.aspx?id=487279394

I didnt expect that the wheel would reach 300 odd.

Keith again he got the last thing everyone wanted. The rs bits. A few pages back the group buy in deal.

[Drew]

http://www.trademe.co.nz/Browse/Listing.aspx?id=487263465

Interesting 16inch tire. has anyone ever used one.
Someone buy it for me and I'll chuck it on the MDX100rrsp.

[Yow Ling]

Someone buy it for me and I'll chuck it on the MDX100rrsp.

Cant you just apply for a grant from Winz ?

[kel]

I didnt expect that the wheel would reach 300 odd.

I did :msn-wink:

[Drew]

Cant you just apply for a grant from Winz ? I don't have a community services card, so they wont talk to me.

[goivy26]

If anyone is keen on a complete ZZR250 front end, wheel, brakes forks and rear wheel with sprocket carrier drop me a line its all in good order, and open to offers (not stupid ones)

Ivan

021 02586178

PS the #16 FXR for sale is my friends its an awsome little bike and well worth the money

[husaberg]

I should be buying this rather than posting this but could make an awesome bucket/SS150

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-490725530.htm
http://images.trademe.co.nz/photoserver/tq/8/222667508.jpghttp://images.trademe.co.nz/photoserver/tq/64/222667564.jpg
http://images.trademe.co.nz/photoserver/tq/39/222667339.jpg

[Shorty_925]

Another bike from HB for sale : http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-491150249.htm

[Drew]

Another bike from HB for sale : http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-491150249.htm

Bloody hell, that's a good one for anyone to just buy and thrash. Mossman, this would have been a way better idea my friend.

[mossy1200]

Bloody hell, that's a good one for anyone to just buy and thrash. Mossman, this would have been a way better idea my friend.

Maybe but im enjoying the build and with freight cost on that is only a few hundred difference.
I probably would have spent money changing that one anyway. I cant help myself.

[mossy1200]

tail

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/fairing/auction-489967000.htm

[gav]

tail

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/fairing/auction-489967000.htm
Yeah, that'll look good!

[RDjase]

and with freight cost

If anyone needs a bucket taken from Hawkes Bay to Manfeild Bridgestone Winter Series rounds let me know, can always squeeze another bike in the van

Shame seeing these HB being sold because of the complaining wHinery bitch

[mossy1200]

The 24mm carb that was on my bucket is for sale if anyone needs one. CR style

[quallman1234]

Honda RS125 Tail piece and fairings....

http://www.trademe.co.nz/Members/Listings.aspx?member=199104

[mossy1200]

Honda RS125 Tail piece and fairings....

http://www.trademe.co.nz/Members/Listings.aspx?member=199104

Hmmm. I wonder if I should.
Muffler got me spanked a little already tonight and I said I wouldnt spend any more cash before the next round(LOL only 6 days away anyway. Dont tell my wife anything).

[chrisc]

FXR in Amberley, Canterbury

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-492149922.htm

[mossy1200]

Assorted wheels. A couple look nice

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-490966938.htm

[Pumba]

Dyno. http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-492395913.htm

might be a good base to hook some electronic monitoring to

[mossy1200]

I cant believe you Mainlanders didnt get in on this auction.

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-490966938.htm

[mossy1200]

bargin. Strip for roller and sell the rest.

http://www.trademe.co.nz/Browse/Listing.aspx?id=491910433

[F5 Dave]

And he couldn't be buggered wheeling it out to take a picture. What a munter! & what is he hiding? Probably has a square front wheel.

. . .which is probably also the condition of Speedway wheels. they sound like an accident waiting to happen.

[steveyb]

Good condition, plenty of tread left, B (soft) compounds.
$150 the pair.
steve@motoacademy.co.nz

or

$250 the pair and get a free set of RS125 fairings!!! Can't say fairer than that.

or

$250 for a set of RS125 fairings and get a free pair of tyres. Can't say even fairer than that.

[Yow Ling]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-490740315.htm

these make good bucket frame, take a 2000 R6 shock with no mods, would work out ok if you sold the tzr motor

[RDjase]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-490740315.htm

these make good bucket frame, take a 2000 R6 shock with no mods, would work out ok if you sold the tzr motor

Your keen on getting every TZR converted to a F4:lol:

I will be to only one left with 250 2t left in them, Got a spare RZ350 engine to do a repower too:headbang:

Could be keen on the pipes if/when it gets bucketed

[Rick 52]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-492094530.htm

CB 125 T Barrels

[NOID]

CBR has to go.

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-494285876.htm

[husaberg]

CBR has to go.

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-494285876.htm
Shame its not a 150 but...
mmmmm... i like Honda's....... you meet the nicest.....
http://jonnypockets.com/blog/images/1689.jpg

[Bert]

CBR has to go.

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-494285876.htm

Shame that life has got in the way of having fun.
Real neat bucket...

[gav]

Looks like a good starter http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-494250442.htm

[Buckets4Me]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-494293215.htm

rear rim 200$

[Drew]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-494293215.htm

rear rim 200$

Doesn't mention spokes anywhere, can ya have them made or just use standard ones ya reckon?

[F5 Dave]

Std ones should be fine if you have 17s, which you won't. You can get them cut down & new threads re rolled. Ken Baine can do that, I have contact details. You'll need the size up spoke nipple most likely as they will have 8.3mm holes. Hopefully your spokes are thick enough to take them. If you'd asked a week ago I had a piece of paper with the sizes written on them. Maybe 3.6mm? Was size 9 or something queer.

Measure the spoke thickness & I can check mine.

I have a wheel at home I've just done this to, but I bought a $149 rim from Torpedo7 on special, was black, but a can of paint made the front black too.

[Drew]

Cheers for that Dave. Was purely out of interest, I have a seventeen inch hoop on the rear already, and no spoked wheels at all.

[Shorty_925]

An FXR for sale in Akl:

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-494655231.htm

[gav]

Set of complete 17" spoked wheels here http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-493085064.htm

[F5 Dave]

that's largely the set up I had but with old RS hubs. strictly speaking too narrow to get slicks on. I took the 2.15 off the rear & am putting it on the front & the 3.5 rim conversion for the rear. He's a bit spendy at that price. Maybe if that disc is straight, but the NZ250 ones do warp easy.

[Squiggles]

So... anybody looking for a GP100 motor? Currently sitting unused in the sidecar frame at my old's in Auckland...

[koba]

So... anybody looking for a GP100 motor? Currently sitting unused in the sidecar frame at my old's in Auckland...

Use the sidecar!

[Squiggles]

Use the sidecar!

I'd have to get it from Auckland to down here in Ashburton. It last ran in Jan before I moved down here. We've only really ridden it in second gear as the suicide shift is quite hairy to use but goes pretty well.
<iframe width="420" height="315" src="http://www.youtube.com/embed/aQiAeLbjXu8" frameborder="0" allowfullscreen></iframe>
We're the one getting passed towards the end.

[Shorty_925]

A Yamaha R15

http://www.trademe.co.nz/Browse/Listing.aspx?id=459248248

[Henk]

Use the sidecar!

Brian and Kamil should buy this

[koba]

Brian and Kamil should buy this

Persuade them... :bash:

[Henk]

Persuade them... :bash:

Hammers won't work but booze might.

Kamil and Brian. Beat us on that sidecar and I'll buy you a bottle of port.

Koba, that should do it, otherwise you buy it and offer stands.

[koba]

Hammers won't work but booze might.

Kamil and Brian. Beat us on that sidecar and I'll buy you a bottle of port.

Koba, that should do it, otherwise you buy it and offer stands.

I'm verboten from buying any more shit. Just being seen in this thread wouldn't be good... :weep:

[Henk]

I'm verboten from buying any more shit. Just being seen in this thread wouldn't be good... :weep:

You can have my spot on our trike if you ever make it up.

[koba]

You can have my spot on our trike if you ever make it up.

We'll have to make sure there are two or more at an event sometime so I can smash you on sidecars as well as on solos.

[Kickaha]

common as muck FXRs for sale
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-495359140.htm
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-494162303.htm
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-494655231.htm

Must be shit everyone is selling them :whistle:

[koba]

common as muck FXRs for sale
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-495359140.htm
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-494162303.htm
http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-494655231.htm

Must be shit everyone is selling them :whistle:

"stripped down bucket racer look" as a selling point in an Auction for a road going FXR. Cool.

[mossy1200]

I think I want a r125 with ohlins suspension and 150 yamaha kit.
Who wants to pay silly money for a aprilia,buel,r6,crf,cbr,tl,xl,xr hybrid

[Kickaha]

I think I want a r125 with ohlins suspension and 150 yamaha kit.

With what you've been spending on yours it probably would have been cheaper to buy one

[steveyb]

Good condition, plenty of tread left, B (soft) compounds.
$150 the pair.
steve@motoacademy.co.nz

or

$250 the pair and get a free set of RS125 fairings!!! Can't say fairer than that.

or

$250 for a set of RS125 fairings and get a free pair of tyres. Can't say even fairer than that.

BUMPITY BUMP. Tyres are now Bridgestone YDC's. Just come off the bike, 2012 tyres.

$175 for tyres only, but really want the fairings gone too.

Email me as above.

266770266771

[NOID]

CBR has to go.

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-494285876.htm

Price edit - - - Kind of need this gone due to Uni commitments :(

[speights_bud]

really want the fairings gone too.

Email me as above.

266770266771

PM sent...

[kel]

PM sent...
Such a good deal, were's the cash when you need it?

[mossy1200]

I got tempted but im not sure they would fit my mc14 frame. Whats the width on them like.

[speights_bud]

Yea, i might be in the dog box but i think it'll be worth it. just can't buy groceries for a few days haha.

Kinda hoping i can make them fit the MC16...

[Pumba]

Shel Racing are selling again. Looks like one of the Lancaster boys CB125T, went well then, but the pilot was a nutter.

http://www.trademe.co.nz/Browse/Listing.aspx?id=496346039

[F5 Dave]

"Hi would you be interested in trading this bike on a Trike,its a suzuki intruder 750cc"

Yuuueww!! Gag me out with a spoon:puke:

[Drew]

"Hi would you be interested in trading this bike on a Trike,its a suzuki intruder 750cc"

Yuuueww!! Gag me out with a spoon:puke:

Bloody Q and A looks like a KB thread!

[Squiggles]

So... anybody looking for a GP100 motor? Currently sitting unused in the sidecar frame at my old's in Auckland...

*Bumpity*

Wouldn't mind getting a few $$ for this, better than it ending up in the scrap heap.

[chrisc]

Soldsoldsold

[richban]

Bits for sale.

NSR mc21 rotors x 4 40 each.
RS rotors machined to 290 for FXR x 2 Mint $50 each
NSR Full front break setup. 2 x calipers lever master cyclinder the lot. Even the pads look good. $150

PM if you want or need. TA

[Slingshot]

There's a set of Teknic 1-peice leathers at Trash Palace in Porirua - they look like they're in ok condition (patch on the bum though), they want $30. I didn't try them on but they looked like they'd probably suit someone around 5'9".

Label has:
48
52

[Skunk]

There's a set of Teknic 1-peice leathers at Trash Palace in Porirua - they look like they're in ok condition (patch on the bum though), they want $30. I didn't try them on but they looked like they'd probably suit someone around 5'9".

Label has:
48
52
How's the bucket?

[Clivoris]

There's a set of Teknic 1-peice leathers at Trash Palace in Porirua - they look like they're in ok condition (patch on the bum though), they want $30. I didn't try them on but they looked like they'd probably suit someone around 5'9".

Label has:
48
52

Thanks for the heads-up. I have scored them for a young fella I know who wants to get racing.

[quallman1234]

Thanks for the heads-up. I have scored them for a young fella I know who wants to get racing.

Good job, sounded like a bargain! My first set of leathers cost me 100$ :).

[F5 Dave]

So did mine. They fit like a sack of potatoes made in leather. Loopy said she'd clean them up for me & they came back with the dye touched up looking sparkly. . .but the catch was they had DNF-DAVE emblazoned over the back. At the time I was going through a collection of Knackered MB50 engines due to budget restrictions & spent more time pushing than racing.

Never trust a woman smiling & offering help.:pinch:

[Slingshot]

How's the bucket?

Shut up!


But because you asked...still the same as it was. Needs front engine mount, front axle, mount for front caliper,forks need sorting, wiring, etc...

One day.

[F5 Dave]

Well you have 6 days till the next meeting so that leaves 5 days spare. Easy!

[mossy1200]

Shut up!


But because you asked...still the same as it was. Needs front engine mount, front axle, mount for front caliper,forks need sorting, wiring, etc...

One day.


I have cbr 250 forks with axel if needed.

[Rehab]

Moving shortly and having a clear out so have an RG250 frame with swingarm and shock to get rid of. Also VT250 wheels (mid 80s I think) No front disks but the rear has drum brake and sprocket carrier. The frame is free. The wheels cost me $150 but if someone wants/needs them I'll take whatever for them. Someone may as well get some use other than being clutter.

[Yow Ling]

Moving shortly and having a clear out so have an RG250 frame with swingarm and shock to get rid of. Also VT250 wheels (mid 80s I think) No front disks but the rear has drum brake and sprocket carrier. The frame is free. The wheels cost me $150 but if someone wants/needs them I'll take whatever for them. Someone may as well get some use other than being clutter.

Where you live Rehab? Im kinda interested in the frame , they are my favorite

[captain hopeless]

My rolling CBR250RR on trademe

http://www.trademe.co.nz/Browse/Listing.aspx?ed=true&id=504023314

[Rehab]

Where you live Rehab? Im kinda interested in the frame , they are my favorite
Glenfield in Auckland, so a bit far from you I'm guessing... Sorry

[cotswold]

You will have to be quick as it's off to the scrappy tomorrow after work but..........................


If anyone wants that suicidal sidecar that was on T/M and on here, it is free to who ever wants it, very rusty but seems solid enough, no engine as that's sat on my garage floor

0278103485 will be scrapped Thursday night

[Slingshot]

I have cbr 250 forks with axel if needed.

Thanks, but have forks...they just need to be stripped down & cleaned. Will need to have an axle machined cause haven't been able to find one to suit, can't even remember what size it is now though :)

[crazy man]

You will have to be quick as it's off to the scrappy tomorrow after work but..........................


If anyone wants that suicidal sidecar that was on T/M and on here, it is free to who ever wants it, very rusty but seems solid enough, no engine as that's sat on my garage floor

0278103485 will be scrapped Thursday nightthis crazy thing
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-494009788.htm

[Henk]

No, this one

http://www.trademe.co.nz/Browse/Listing.aspx?id=498749160

[mossy1200]

Thanks, but have forks...they just need to be stripped down & cleaned. Will need to have an axle machined cause haven't been able to find one to suit, can't even remember what size it is now though :)

The cbr axel that i have is 2 piece and stays on the wheel untill its of the bike then splits to remove it from the wheel.

[Dutchee]

Where you live Rehab? Im kinda interested in the frame , they are my favorite

Yell out if you need help with the logistics, Mike. Not keen on driving the van we've got, but sure we can work something out.

[F5 Dave]

this crazy thing
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-494009788.htm

How is that a sidecar?? leaning a 3rd wheel against a bike with small wheels is a sidecar?

[Pumba]

You will have to be quick as it's off to the scrappy tomorrow after work but..........................


If anyone wants that suicidal sidecar that was on T/M and on here, it is free to who ever wants it, very rusty but seems solid enough, no engine as that's sat on my garage floor

0278103485 will be scrapped Thursday night

So was anyone sick enough to take it off your hands?



GP125 http://www.trademe.co.nz/Browse/Listing.aspx?id=504515522&ed=true

[cotswold]

[QUOTE=Pumba;1130378408]So was anyone sick enough to take it off your hands?


No but but as I ran out of time it is still cluttering up my drive and will be until monday now

[quallman1234]

Need to clear the garage....

Have a RG150 rolling frame (comes with a FXR front wheel rather than RG... Not setup with spacers etc both 17"s still).
Open to offers
PM If your interested.

[timg]

http://www.trademe.co.nz/Browse/Listing.aspx?id=512288269

[chrisc]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-510784037.htm

http://www.trademe.co.nz/motors/motorbikes/motorbikes/other/auction-511319902.htm

[crazy man]

http://www.trademe.co.nz/Browse/Listing.aspx?id=512288269you could sponser me this

[timg]

you could sponser me this:laugh: :laugh: :killingme:killingme :clap::no:

[Drew]

:laugh: :laugh: :killingme:killingme :clap::no:
Where did that jet set come from? I really need to get some of those type and few people have any.

[timg]

Where did that jet set come from? I really need to get some of those type and few people have any. Didn't know they were anything special. Get my jets from Superior M/C, Christchurch, take in a sample and ask for the sizes I think I need. Cheers.

[timg]

http://www.trademe.co.nz/Browse/Listing.aspx?id=512288269

Closes tonite. Reserve has been met so it will sell. Get in quick if you want it. Hard to find without having to buy a whole bike just to get the engine....

[Yow Ling]

Closes tonite. Reserve has been met so it will sell. Get in quick if you want it. Hard to find without having to buy a whole bike just to get the engine....

As it turns out just about as expensive, I think you did alright on that one Tim

[Pumba]

As it turns out just about as expensive, I think you did alright on that one Tim

Fark in hell. Better not blow mine up anytime soon then

[Henk]

Pumba, I have the spare engine that Brenton had back now if you want to use it to power your chair while you get yours sorted.

[Yow Ling]

Makes this one pretty reasonable then

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-510350837.htm

[timg]

As it turns out just about as expensive, I think you did alright on that one Tim Yep, can't complain at that. Sorry that it didn't go the way you wanted


Makes this one pretty reasonable then

http://www.trademe.co.nz/motors/motorbikes/motorbikes/sports/auction-510350837.htm

Yep, a great start for a F4 racer

[crazy man]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-505090226.htm
for the bikey bucket boy

[Str8 Jacket]

Pumba, I have the spare engine that Brenton had back now if you want to use it to power your chair while you get yours sorted.

You might want to wait until after I come up and blow up, oh I mean ride your bikes..... Though Pumba has offered me his so.......:wait:

[F5 Dave]

http://www.trademe.co.nz/motors/motorbikes/motorbikes/classic-vintage/auction-505090226.htm
for the bikey bucket boy

Sweet I always wanted the 250 version of that so I could put ape hangers on & turn up to HOG events A-RING-DING-DING. -In the wind righteous Bros! (& still have enough power & handling to become scarce when the low foreheaders get the joke).

3k for an incomplete non running basket case is a bit salty.

[crazy man]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/wheels/auction-515850727.htm
fzr250 rims

[Dutchee]

http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/frames/auction-516330454.htm rs125 frame for $550/650 Wellington
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/complete-engines/auction-515186820.htm cb100 engine for $40 in new Plymouth
http://www.trademe.co.nz/motors/motorbikes/parts-for-sale/other/auction-515939536.htm vista bike in Dunedin at $26