Shed night

[Willdat?]

Does it rev ok with the choke on?

It does when cold (with a little coughing and spluttering to expected from a cold bike being revved out with the choke on). But once warm it won't rev even with the choke.

[Woodman]

It does when cold (with a little coughing and spluttering to expected from a cold bike being revved out with the choke on). But once warm it won't rev even with the choke.

Mine did that the other day after raising the needle. it was the diaphragm not seated proper when I put the top back on the carb. Possible vacuum issues??

warewolf you should still have my 15 mm spanner from the first shed night.

[Willdat?]

Mine did that the other day after raising the needle. it was the diaphragm not seated proper when I put the top back on the carb. Possible vacuum issues??

Carb is being disassembled today - there was a few perish lines in the diaphragm when we pulled it apart at the first shed night.

[ZK-Awesome]

Anything else? Anyone?

Yep, got a new clutch cable to lube then install, hopefully someone can help me through it! (for a start the straw on the WD40 can is too big to go in the hole of the luber tool)

[warewolf]

No worries, also have a lube gadget that works.

You know you have to put the straw in before you tighten the clamp around the hose, eh?

[ZK-Awesome]

I didn't know that but I just tried it, the straw still doesn't fit Ah well, bring on shed night! Hopefully the old one will get me up the lake tomorrow.

[ZK-Awesome]

I won't be bringing the bike tomorrow night, it pooed itself when I was up the lake earlier today, had to get it trailered back.

[warewolf]

I won't be bringing the bike tomorrow night, it pooed itself when I was up the lake earlier today, had to get it trailered back.

Arse. 'Spose we'll hear about it tomorrow?

warewolf you should still have my 15 mm spanner from the first shed night.

Ah, didn't realise it was still here - it is, I checked.

[ZK-Awesome]

Arse. 'Spose we'll hear about it tomorrow?

Yep, I should be there about 8 as I have to work beforehand.

[MyGSXF:Me]

Hope you boys had a good night tonight.. I had to take Alex to the Dr's instead.. He got a bee sting yesterday & the Antihistamine wasn't working.. plus to top my day off.. I stood on a nail while getting the firewood in

[earl]

you are mad if you pay the bill!!!!

[NordieBoy]

you are mad if you pay the bill!!!!

I thought bees did it for free?

[Willdat?]

I thought bees did it for free?

I wonder if this is talking to me?

[MyGSXF:Me]

I wonder if this is talking to me?

Would say so.. he's a "noobie" & might not know how to do the "quote" thingee, so that the rest of us know what he talking about...

[Willdat?]

For those that are interested...I've got drag bars on my Shanyang now! Looks pretty cool, after a round headlight with room for a wiring loom in the back now if anyone has one around the place

And I don't want to talk about my DR250...$1900 + estimated $200 to get the stator rewound.