Page 2 of 2 FirstFirst 12
Results 16 to 30 of 30

Thread: Bike choice! Time to change?

  1. #16
    Join Date
    25th December 2009 - 11:44
    Bike
    2008 DR650
    Location
    Hanmer Springs
    Posts
    108
    [QUOTE=Transalper;1129879922]I feel a 'tried to tell you' coming on from back when you were originally asking how to get the 650 more trail friendly.

    Yep Fair enough...Do like the DR though, won't be changing unless its a real improvement.

  2. #17
    Join Date
    9th May 2007 - 16:10
    Bike
    . .
    Location
    Here
    Posts
    4,513
    Wr250r.....

  3. #18
    Join Date
    15th September 2008 - 16:53
    Bike
    1999 BMW R1100GS / 2012 WR 250 R
    Location
    Inglewood
    Posts
    838
    Quote Originally Posted by Taz View Post
    Wr250r.....
    So what x akaly are you trying to say here

  4. #19
    Join Date
    25th December 2009 - 11:44
    Bike
    2008 DR650
    Location
    Hanmer Springs
    Posts
    108
    Quote Originally Posted by Taz View Post
    Wr250r.....
    Yea but its quite a bit taller than the DR...sounds really good though

  5. #20
    Join Date
    9th May 2007 - 16:10
    Bike
    . .
    Location
    Here
    Posts
    4,513
    Quote Originally Posted by That looks like fun View Post
    So what x akaly are you trying to say here

    I dunno really. I'm not all that bright.....





















    WR250R or a road reg WR250F

  6. #21
    Join Date
    10th May 2010 - 21:56
    Bike
    DR650 again
    Location
    Otaki
    Posts
    643
    We have a DR200 as well as the 650. The Dr200 trucks along at 110 ish max with me on the open road, after all the Keintech mods, and can move me reasonably well on the beach and tracks. Not sure what suits you but I am a fairly large bloke and would rather be astride the 650 than the 200 on the road and on the track.

    I can easily get the bike crawling when necessary and I run the standard gearing.

    Cheers

  7. #22
    Join Date
    20th January 2010 - 21:19
    Bike
    xr650
    Location
    ch-ch
    Posts
    578
    [QUOTE=countryguy;1129879955]
    Quote Originally Posted by Transalper View Post
    I feel a 'tried to tell you' coming on from back when you were originally asking how to get the 650 more trail friendly.

    Yep Fair enough...Do like the DR though, won't be changing unless its a real improvement.
    XR650 a Real improvement on a DR650 - "What ya reckon Transalper ?"

    Had a whirl on a 2005 YZ250F and was impressed - like a modern day xr250 - guy that owns the yz had it for years now and is rough on it , does no maintenace, has spent no dollars on repairs and it still goes well.

  8. #23
    Join Date
    20th November 2005 - 22:24
    Bike
    WR250R DR650 Transalp650
    Location
    Christchurch
    Posts
    4,229
    Quote Originally Posted by brp View Post

    XR650 a Real improvement on a DR650 - "What ya reckon Transalper ?" ...
    I think I'd choose the L version with Electric leg but the low height box will be the box not ticked again with a XR650.

    If it really is only the crawling speed that matters then maybe do the 520 chain conversion and go with the really big rear sprocket on the DR650, but in doing that the highway speed end may become as uncomfortably revvy and slow as a good 250cc bike anyway.

    I liked the DR250 Djebel with 17 litre stock metal tank for a bit of adventuring but for a 250 it was possibly heavy and gearing become a bit of a compromise choice again... highway 120km/hr or better 1st gear for trail. It never was going to feel as light and manoeuvrable as my CRF230 on the single track but then the CRF is geared so low it dont get much over 90km/hr and sound like it will explode if I could have pushed the revs further.
    www.remotemoto.com - a serious site for serious ADV riders, the ultimate resource in the making.
    Check out my videos on Youtube including... the 2011 Dusty Butt 1K - Awakino Challenge and others.

  9. #24
    Join Date
    12th June 2007 - 21:13
    Bike
    Africa Twin / XRV 750 (RD04L)
    Location
    Kapiti Coast
    Posts
    1,077
    Blog Entries
    6
    you can cut the seat down on the 400... also it may come down to a bit of riding technique / clutching on your DR. Rather than idling across rivers (if that's how you're doing it?) my clutch gets a bit of a workout to get through it in bursts. My AT gets across rivers without too much drama and it aint a low geared trail bike. Weight is my issue.
    There are two kinds of adventurers: those who go truly hoping to find adventure and those who go secretly hoping they won't. We should come home from our adventures having faced their perils and uncertainties, endured their discomfort and beaten the odds, with a sly acknowledgment and revitalised solidarity of character.

  10. #25
    Join Date
    4th April 2006 - 19:12
    Bike
    Too many
    Location
    Middle Earth (Wellington)
    Posts
    225

    Slip the clutch

    Quote Originally Posted by buggsubique View Post
    you can cut the seat down on the 400... also it may come down to a bit of riding technique / clutching on your DR. Rather than idling across rivers (if that's how you're doing it?) my clutch gets a bit of a workout to get through it in bursts. My AT gets across rivers without too much drama and it aint a low geared trail bike. Weight is my issue.
    In my view the first question to ask before "what bike" is "what is the mission". If the mission is riding longer distances than a small bike is going to be very compromised on the road legs and a larger more comfortable bike which will be less convenient off road is probably the optimum compromise. If the mission is mainly off road then road comfort and durability is of little importance and there are plenty of small road legal trail type bikes to chose from. Only the rider can determine what their desired "mission" is.

    It is when you try to achieve good performance in both areas that the choice becomes limited and probably impossible.

    Gearing is one compromise and slipping the clutch is one way to extend the useability of a set of gears. That is why they are multi plate and run in oil!

    A good way to cross rivers and rough areas is to hold a constant throttle a bit above idle (2500 rpm or so on an F650GS ) slip the clutch slightly and drag the back brake lightly to control speed. Throttle or clutch can be adjusted when more drive is needed. I usually used the clutch and left the throttle set. Allows slow speed and forward progress to overcome rocks and so on while leaving comfortable gearing for road (an F650 idles at 20 km/h!). My first F650 went on countless adventure rides 2 up and the only consequence I saw in 36,000 km was worn out rear brake pads (before the front set).

    Michael
    Sh*t doesn't just "happen". There is always an a*sehole involved.

  11. #26
    Join Date
    2nd March 2004 - 13:00
    Bike
    FransAlp 700
    Location
    Nelson
    Posts
    14,484
    Quote Originally Posted by Transalper View Post
    If it really is only the crawling speed that matters then maybe do the 520 chain conversion and go with the really big rear sprocket on the DR650, but in doing that the highway speed end may become as uncomfortably revvy and slow as a good 250cc bike anyway.
    16/46 (112 link chain) is about the same as stock with a 14 front.

    I carry 14-15-16 fronts.
    So I can go to the same ratio as stock with a 12 front in less than 5 mins.

  12. #27
    Join Date
    25th December 2009 - 11:44
    Bike
    2008 DR650
    Location
    Hanmer Springs
    Posts
    108
    Quote Originally Posted by NordieBoy View Post
    16/46 (112 link chain) is about the same as stock with a 14 front.

    I carry 14-15-16 fronts.
    So I can go to the same ratio as stock with a 12 front in less than 5 mins.
    I've got a 13 front fitted with stock chain and rear.

    Are you suggesting changing the rear and chain and fitting a 12 to gear lower but still carry original front ( I also have a 16 front). Where would you get a 12 front, I had enough trouble finding the 13.

  13. #28
    Join Date
    2nd March 2004 - 13:00
    Bike
    FransAlp 700
    Location
    Nelson
    Posts
    14,484
    Quote Originally Posted by countryguy View Post
    I've got a 13 front fitted with stock chain and rear.

    Are you suggesting changing the rear and chain and fitting a 12 to gear lower but still carry original front ( I also have a 16 front). Where would you get a 12 front, I had enough trouble finding the 13.
    Ahhhh, nope.

    46 rear with a 14 front is basically same as 12/41 but the sprocket/swingarm/slider will last a bit longer.

  14. #29
    Join Date
    8th July 2004 - 14:56
    Bike
    KTM 640 Enduro
    Location
    Rotoiti
    Posts
    2,090
    The WR-R is still fairly tall, but it does carry it's weight quite low. A revvy motor compared with the DR650 but with a nice wide ratio box to suit.

    I've only ridden a DRZ400 briefly but it felt more top heavy, more vibey & more grunty. The spread of gear ratios on a DRZ400 is pretty narrow, your DR has more spread of ratios, so it would have just been the sprockets making the difference.

    Both the Kawasaki Super Sherpa & the old XT225/pre 08 XT250 have a really good gear spread, the new XT250 isn't too bad either, all these have a nice low seat height but the downside is cheap short travel suspension. The CRF230 has a good gearing range also, & a smidge more suspension travel that inevitably means a taller seat. These bikes are all fine if you have a sit down & nana it riding style but if you prefer to stand up & fang it then the WR-R with it's several grand worth of proper suspension is the tool for you.

    Cheers
    Clint

  15. #30
    Join Date
    20th January 2010 - 21:19
    Bike
    xr650
    Location
    ch-ch
    Posts
    578
    Quote Originally Posted by Transalper View Post
    I think I'd choose the L version with Electric leg but the low height box will be the box not ticked again with a XR650.
    Havn't ya heard - "If it hasn't got one of UNCLE FLIP'S KICKERS it isn't a real motorbike!!! Up the proverbial with the latest DR if ya battery dies or starter motor craps out in the boonies - no back up kick start - what were they thinking ?

    Low height box ? Good for 188 KMH off the shop floor, with all the torque plenty of room to play round with different sprockets to suit ya purpose.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •