Maybe you should do some more research before you shoot your mouth off Brian, yes I did try some different cam settings but then returned to the config that was on that dyno run with that exact map and settings, dynos measure differently anyway so the only real comparason is on the same dyno. By the way the dyno runs I had ranged between 4 peak HP
The compression test sounds a little on the low side but it depends how it was measured, the only way to really know if the cylinder has a leak is to do a differential leak down test and also you will hear hissing in the crank case by taking off the oil cap or at the mufflers for ex valves - that would be the first step.
I dont know how you can 'look' at the cam timing they are on adjustable slots on the cam gears and take quite a bit to measure.
The last meeting I did was at Paeroa and it ran fine, I would not knowingly sell a bike with a problem - I also emailed you to see how it was going - no reply..
Not to mention I delivered that bike to Auckland under strange purchasing circumstances and gave you tyre warmers for free!!!!!!
I suggest in future you talk to someone you have concerns with first before questioning someones integrity

Bookmarks