NSR250 and RS250 Bits and Pieces for sale [Melb]

[ChrisBurke]

Howdy,

I have some NSR250(MC21) and RS250 GP parts for sale -

I have a used TYGA GP fairing set, incl front guard, clear screen, upper, belly, tail, subframe, front H bracket. Has had various paint/attempts and will need a rub down before repainting - Im only asking $500 for this kit complete!

Also -

- 1 pair of Barrels both have minor score in them, good for replating.
- 1 pair of heads (SE/SP)(front and rear) with minor damage from piston failure, good for restoring.
- 1 pair of axles (front and rear).
- 1 pair of heads (SE/SP)(front and rear), perfect condition. SOLD
- 1 riders seat
- 1 complete rear brake setup, master, hose, caliper, bracket.
- 1 headlight
- 1 pair of standard chambers with silencers - in perfect condition.
- 1 radiator, great condition, some surface rust on the mesh. SOLD
- 2 pairs of OEM discs, in good condition. SOLD
- 1 pair of OEM rearsets in good condition
- 1 oil pump

- 1 complete frame and swing arm (MC21)(no shock) with Aus compliance (can be registered here).Im asking $500 for this

Pictures to come - reasonable offers considered.

This is a rare find -

This is a fully rebuilt Honda NSR250 (MC21SE) Dry Clutch Engine. Parts included in the rebuild - new crank, new top end (pistons etc), new clutch. Engine is now like new - has not been started or run in.
Includes everything in pictures (no carbs). SOLD

http://i12.ebayimg.com/03/i/000/b4/18/65c9_1.JPG
http://i24.ebayimg.com/01/i/000/b4/18/6469_1.JPG
http://i21.ebayimg.com/01/i/000/b4/18/6517_1.JPG
http://i15.ebayimg.com/03/i/000/b4/18/6676_1.JPG
http://i16.ebayimg.com/05/i/000/b4/18/672d_1.JPG
http://i9.ebayimg.com/05/i/000/b4/18/61a6_1.JPG
http://i21.ebayimg.com/03/i/000/b4/18/63dc_1.JPG
http://i20.ebayimg.com/03/i/000/b4/18/6b2f_1.JPG

Im looking for $3000 for this engine, but Im happy to negotiate. SOLD

'91mdl? Honda RS250 stuff -

- 1 steering dampener.
- 1 complete front end - theyre upside down, with Brembo calipers. The steer tube has been pushed out to make way for an NSR steer tube (forks currently fitted to a 21 frame) but I have the original RS steer tube also.
- 1 front 5 spoke Magnesium Marchesini 'Gira' - it has a few dings etc but nothing to worry about (from tyre changing etc). I believe it to be a 4 inch.
- 1 rear wheel (white) 5 inch.
- 1 rear 4.5 inch Magtek rear (Gold). SOLD
- 1 triple core radiator (few dings but is usable) SOLD
- 2 Pairs of OEM 296mm discs (suit VFR/RVF/RS) 1 set SOLD

And last but not least -

I have a complete MC21 which has the R model, wet clutch engine.

- Engine has just had top end build (pistons, etc) and has been run in.
- Bodywork is original white and blue/yellow with white tank and white wheels - Body is a bit rough and rashed on one side but could be cleaned up easily.
- Mechanically the bike is reasonable, and is in RWC condition.
- Mostly original condition except for the TYGA rearsets.

Its a good starting point - I have plenty of go fast goodies to go with if your interested, and can also arrange a better body/paintwork if needed.

Looking for $3500 - price neg based on rego/or not, etc - needs to go soon!

As always Im happy to ship where ever - just ask.

Pics will follow - need some time :-)

0438-611-137 or chris(at)bcomponents.com.au

Cheers

[ChrisBurke]

Update with some prices...

[NSR-Dan]

Hey Chris.

Daniel here from DS racing, NZ importer of tyga stuff.

wonder how much you want for the RS250 front end??

[ChrisBurke]

Daniel,

As a 'front end' Im including the legs, the clamps, the clipons pictured, the original steer tube, the front axle/spacers, the Brembo calipers and braided hoses you see in the pics - for this lot Im asking $1500 AUD.

You need to run 296mm Honda rotors (or equiv) which came off most 400 Honda from the time - CBR/VFR/RVF400. I can sell you the set pictured if you need them for $300 AUD.

You can run an original NSR wheel, or you can go to the wider VFR/RVF/RS wheel which has the same brake rotor bolt pattern.

The Magnesium Marchesini wheel in the pictures is very rare - but as with everything, its also for sale if you need it.

Some pics...

Hey Chris.

Daniel here from DS racing, NZ importer of tyga stuff.

wonder how much you want for the RS250 front end??

[Nsrrider]

Do you have an airbox that will fit an mc21

[motorcyclesonline.net]

Hello
Do you still have the Tyga bits - fairings etc - photos pls

www.motorcyclesonline.net

Howdy,

I have some NSR250(MC21) and RS250 GP parts for sale -

I have a used TYGA GP fairing set, incl front guard, clear screen, upper, belly, tail, subframe, front H bracket. Has had various paint/attempts and will need a rub down before repainting - Im only asking $500 for this kit complete!

Also -

- 1 pair of Barrels both have minor score in them, good for replating.
- 1 pair of heads (SE/SP)(front and rear) with minor damage from piston failure, good for restoring.
- 1 pair of axles (front and rear).
- 1 pair of heads (SE/SP)(front and rear), perfect condition. SOLD
- 1 riders seat
- 1 complete rear brake setup, master, hose, caliper, bracket.
- 1 headlight
- 1 pair of standard chambers with silencers - in perfect condition.
- 1 radiator, great condition, some surface rust on the mesh. SOLD
- 2 pairs of OEM discs, in good condition. SOLD
- 1 pair of OEM rearsets in good condition
- 1 oil pump

- 1 complete frame and swing arm (MC21)(no shock) with Aus compliance (can be registered here).Im asking $500 for this

Pictures to come - reasonable offers considered.

This is a rare find -

This is a fully rebuilt Honda NSR250 (MC21SE) Dry Clutch Engine. Parts included in the rebuild - new crank, new top end (pistons etc), new clutch. Engine is now like new - has not been started or run in.
Includes everything in pictures (no carbs). SOLD

http://i12.ebayimg.com/03/i/000/b4/18/65c9_1.JPG
http://i24.ebayimg.com/01/i/000/b4/18/6469_1.JPG
http://i21.ebayimg.com/01/i/000/b4/18/6517_1.JPG
http://i15.ebayimg.com/03/i/000/b4/18/6676_1.JPG
http://i16.ebayimg.com/05/i/000/b4/18/672d_1.JPG
http://i9.ebayimg.com/05/i/000/b4/18/61a6_1.JPG
http://i21.ebayimg.com/03/i/000/b4/18/63dc_1.JPG
http://i20.ebayimg.com/03/i/000/b4/18/6b2f_1.JPG

Im looking for $3000 for this engine, but Im happy to negotiate. SOLD

'91mdl? Honda RS250 stuff -

- 1 steering dampener.
- 1 complete front end - theyre upside down, with Brembo calipers. The steer tube has been pushed out to make way for an NSR steer tube (forks currently fitted to a 21 frame) but I have the original RS steer tube also.
- 1 front 5 spoke Magnesium Marchesini 'Gira' - it has a few dings etc but nothing to worry about (from tyre changing etc). I believe it to be a 4 inch.
- 1 rear wheel (white) 5 inch.
- 1 rear 4.5 inch Magtek rear (Gold). SOLD
- 1 triple core radiator (few dings but is usable) SOLD
- 2 Pairs of OEM 296mm discs (suit VFR/RVF/RS) 1 set SOLD

And last but not least -

I have a complete MC21 which has the R model, wet clutch engine.

- Engine has just had top end build (pistons, etc) and has been run in.
- Bodywork is original white and blue/yellow with white tank and white wheels - Body is a bit rough and rashed on one side but could be cleaned up easily.
- Mechanically the bike is reasonable, and is in RWC condition.
- Mostly original condition except for the TYGA rearsets.

Its a good starting point - I have plenty of go fast goodies to go with if your interested, and can also arrange a better body/paintwork if needed.

Looking for $3500 - price neg based on rego/or not, etc - needs to go soon!

As always Im happy to ship where ever - just ask.

Pics will follow - need some time :-)

0438-611-137 or chris(at)bcomponents.com.au

Cheers