Page 1 of 2 12 LastLast
Results 1 to 15 of 27

Thread: Friday 20/07/07 Yet another Mad cap night of Mechanical Mayhem at Chez gijoe1313!

  1. #1
    Join Date
    22nd July 2006 - 11:59
    Bike
    900 Hornet, Preddy, RZ's, A100's
    Location
    Auckland, Takanini
    Posts
    5,159
    Blog Entries
    54

    Blah Friday 20/07/07 Yet another Mad cap night of Mechanical Mayhem at Chez gijoe1313!

    Righto, it seems my rides and mechanical needs have been worked through and sorted!

    Just another open invite to all and sundry who need their rides to be looked at and worked on! Bring your steeds, bring the stuff, guff and bling to bung onto/into your bikes!

    Will be stripping back all parts of Dandi and working out the list to do to get her into trackday snarling performance.

    And oh yes, usual vittles and vitae aqua will be provided for nourishment of physical selves whilst mechanical steeds of soul exploration are dealt to!
    "I like to ride anyplace, anywhere, any time, any way!"

  2. #2
    Join Date
    24th September 2006 - 02:00
    Bike
    -
    Location
    -
    Posts
    4,736
    Well, that's my mother's birthday, so I'm definitely not coming this time

    Have fun lads.

  3. #3
    Join Date
    1st March 2007 - 11:30
    Bike
    2014 R1200 GS, 2007 DR 650
    Location
    Whakatane
    Posts
    1,473
    Sorry I couuldn't make it last Friday - out of town funeral. The third one in a month actually. I seem to be dangerous to know.

    Anyway, did you finish stripping down that RZ motor.

    If so, what state was the crank assembly in?

    I ask because it looked like the head had been attacked by a needle roller or two and they are supposed to live in the big ends. It usually means big trouble if they find their way up into the chamber.
    I may not be as good as I once was, but I'm as good once as I always was.

  4. #4
    Join Date
    22nd July 2006 - 11:59
    Bike
    900 Hornet, Preddy, RZ's, A100's
    Location
    Auckland, Takanini
    Posts
    5,159
    Blog Entries
    54
    Quote Originally Posted by Bass View Post
    Sorry I couuldn't make it last Friday - out of town funeral. The third one in a month actually. I seem to be dangerous to know.

    Anyway, did you finish stripping down that RZ motor.

    If so, what state was the crank assembly in?

    I ask because it looked like the head had been attacked by a needle roller or two and they are supposed to live in the big ends. It usually means big trouble if they find their way up into the chamber.
    Heh still haven't gotten around to it yet! Was focussed on fixing up the little ol'Hornet and sorting out Xerxesdaphat! Will definitely be working on the donk this week!
    "I like to ride anyplace, anywhere, any time, any way!"

  5. #5
    Join Date
    17th May 2007 - 14:41
    Bike
    L0 GSXR-R 1000 #87
    Location
    Taranaki
    Posts
    2,524
    Im commin this week got a "thing" to sort out. C u there
    Firestarter Racing on facebook http://www.facebook.com/FirestarterRacing

    Racing thanks to:

    www.fluidcoatings.co.nz
    www.motostyle.co.nz
    MAXIMA racing Oils
    www.projectdigital.co.nz
    METZELER Tires
    New Plymouth Motorcycle Center
    www.topstitch.co.nz/

  6. #6
    Join Date
    1st March 2007 - 11:30
    Bike
    2014 R1200 GS, 2007 DR 650
    Location
    Whakatane
    Posts
    1,473
    Quote Originally Posted by gijoe1313 View Post
    Heh still haven't gotten around to it yet! Was focussed on fixing up the little ol'Hornet and sorting out Xerxesdaphat! Will definitely be working on the donk this week!
    Roger that.
    May I suggest slowing the disassembly pace a bit from the last session and maybe take a few notes.
    Otherwise (and no aspersions intended), I doubt if you will be able to easily figure out how it goes together again, even with a workshop manual.
    If I was presented with a box of random bits 3 months from now, I would have to think hard to come up with a working unit and I've rebuilt one or two.
    But hey, if you are into Chinese puzzles, it may be right up your street.
    I may not be as good as I once was, but I'm as good once as I always was.

  7. #7
    Join Date
    21st October 2006 - 09:09
    Bike
    Whatever I beg/borrow
    Location
    Papakura, Auckland
    Posts
    1,308
    Quote Originally Posted by Bass View Post
    But hey, if you are into Chinese puzzles, it may be right up your street.
    Funny you should mention that...

    And J, I guess I might as well just leave me tools there then!
    At the 2007 Westpac Ride:

    Donor: So ya glad you're a Biker?

    Minnie: F**k yeah!

  8. #8
    Join Date
    22nd July 2006 - 11:59
    Bike
    900 Hornet, Preddy, RZ's, A100's
    Location
    Auckland, Takanini
    Posts
    5,159
    Blog Entries
    54
    Quote Originally Posted by Bass View Post
    Roger that.
    May I suggest slowing the disassembly pace a bit from the last session and maybe take a few notes.
    Otherwise (and no aspersions intended), I doubt if you will be able to easily figure out how it goes together again, even with a workshop manual.
    If I was presented with a box of random bits 3 months from now, I would have to think hard to come up with a working unit and I've rebuilt one or two.
    But hey, if you are into Chinese puzzles, it may be right up your street.
    Heehee! Point taken - will be setting up a photo assembly so each step can be done! And also got contacted by a mysterious sensei who knows all and sees all about two strokers

    Anyhow, will be going over all the dissassembled units and seeing whether they are good or need to be biffed!
    "I like to ride anyplace, anywhere, any time, any way!"

  9. #9
    Join Date
    1st March 2007 - 11:30
    Bike
    2014 R1200 GS, 2007 DR 650
    Location
    Whakatane
    Posts
    1,473
    Quote Originally Posted by gijoe1313 View Post
    will be setting up a photo assembly so each step can be done! :
    Excellent idea !!




    Quote Originally Posted by gijoe1313 View Post
    Anyhow, will be going over all the dissassembled units and seeing whether they are good or need to be biffed!
    You will need a press and some skill to dismantle the crank assembly.
    I may not be as good as I once was, but I'm as good once as I always was.

  10. #10
    Join Date
    22nd July 2006 - 11:59
    Bike
    900 Hornet, Preddy, RZ's, A100's
    Location
    Auckland, Takanini
    Posts
    5,159
    Blog Entries
    54
    Quote Originally Posted by Bass View Post
    Excellent idea !!

    You will need a press and some skill to dismantle the crank assembly.
    Yes, that can be arranged... a shady character has approached me with his interest in all things two stroke as well and has a workshop capable of doing major mechanical mayhem!

    I get the feeling that other bikes will be worked on this Friday! Heh....
    "I like to ride anyplace, anywhere, any time, any way!"

  11. #11
    Join Date
    5th March 2007 - 18:08
    Bike
    Gone
    Location
    AKLD
    Posts
    2,154
    Guess I'll be attending this one, need to install my Steel Mate

  12. #12
    Join Date
    14th March 2006 - 21:55
    Bike
    06 Bandit GSF 1200SK6
    Location
    Levin, Manawatu
    Posts
    6,404
    I would attend if I lived in Aucks .. but just think all dat practice .. when ya finally get to met Betsy you will know what ya doing LOL

    must start writing down that list ......


    ohh yeah Betsy IS an RZ .. not an RD
    ..
    Have to Karma ... Justice catches up eventually !!

  13. #13
    Join Date
    6th March 2006 - 20:41
    Bike
    2010 CB600, 2007 ZX14
    Location
    Manurewa - Auckland
    Posts
    1,946
    Who needs to be living in auckland!
    Just pitch a tent next to the bikes, nothing better than camping with bikes :P

  14. #14
    Join Date
    23rd June 2007 - 20:30
    Bike
    2007 Yamaha R-Sixer
    Location
    Jafa
    Posts
    470
    Blog Entries
    1
    Quote Originally Posted by breakaway View Post
    Guess I'll be attending this one, need to install my Steel Mate
    ditto need mine in too

  15. #15
    Join Date
    18th December 2004 - 08:09
    Bike
    Triumph Tiger
    Location
    Texas
    Posts
    2,086
    Bugger, can't make this one either.

    "If you can't laugh at yourself, you're just not paying attention!"
    "There is no limit to dumb."

    "Resolve to live with all your might while you do live, and as you shall wish you had done ten thousand years hence."

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •