Results 1 to 10 of 10

Thread: Suspension setup guide and video

  1. #1
    Join Date
    30th March 2004 - 11:00
    Bike
    2001 RC46
    Location
    Norfshaw
    Posts
    10,455
    Blog Entries
    17

    Suspension setup guide and video

    Couldn't find this doing a quick search, so aplogies if it's been posted before.
    The first is basic suspension setup video from "On the Throttle". It's very easy to follow if you're a noob at this sort of thing.

    The second is a set of suspension set up documents from "Feel the Track!"
    ... and that's what I think.

    Or summat.


    Or maybe not...

    Dunno really....


  2. #2
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Quote Originally Posted by vifferman View Post
    Couldn't find this doing a quick search, so aplogies if it's been posted before.
    The first is basic suspension setup video from "On the Throttle". It's very easy to follow if you're a noob at this sort of thing.

    The second is a set of suspension set up documents from "Feel the Track!"
    That site is full of good, practical info.

    Ph: 06 751 2100 * Email: robert@kss.net.nz
    Mob: 021 825 514 * Fax: 06 751 4551

  3. #3
    Join Date
    9th February 2009 - 12:48
    Bike
    1999 Red 955i Daytona
    Location
    Kaiapoi, New Zealand
    Posts
    634
    yip... very interesting... time for a tinker I can see

  4. #4
    Join Date
    7th January 2005 - 09:47
    Bike
    .
    Location
    .
    Posts
    2,098
    I used this guide to set-up the sag on my K6 and found the maximum deflection I could get out of the front forks was 18mm?
    At 80kg with my gear on its seems hard to believe the springs are to firm.

  5. #5
    Join Date
    19th August 2007 - 18:49
    Bike
    GSX-R600 k8
    Location
    Palmerston Otago
    Posts
    2,176
    Quote Originally Posted by SixPackBack View Post
    I used this guide to set-up the sag on my K6 and found the maximum deflection I could get out of the front forks was 18mm?
    Is that from topped out or from free sag?

    How much travel is left?

  6. #6
    Join Date
    9th February 2009 - 12:48
    Bike
    1999 Red 955i Daytona
    Location
    Kaiapoi, New Zealand
    Posts
    634
    Quote Originally Posted by SixPackBack View Post
    I used this guide to set-up the sag on my K6 and found the maximum deflection I could get out of the front forks was 18mm?
    At 80kg with my gear on its seems hard to believe the springs are to firm.
    so you only have 18mm drop when you sit on it???

  7. #7
    Join Date
    30th March 2004 - 11:00
    Bike
    2001 RC46
    Location
    Norfshaw
    Posts
    10,455
    Blog Entries
    17
    Did you top the forks out? If you have no centrestand, you'll probably need someone to help with this, to mark or measure the front fork tubes while you lift the bike's front off the ground by leaning it over on its sidestand.
    ... and that's what I think.

    Or summat.


    Or maybe not...

    Dunno really....


  8. #8
    Join Date
    19th August 2007 - 18:49
    Bike
    GSX-R600 k8
    Location
    Palmerston Otago
    Posts
    2,176
    Quote Originally Posted by vifferman View Post
    Couldn't find this doing a quick search, so aplogies if it's been posted before.
    The first is basic suspension setup video from "On the Throttle". It's very easy to follow if you're a noob at this sort of thing.
    I found this very helpful for setting rebound. I understand pogoing or pump-down and didn't think my bike was too bad for either so had left rebound at factory settings.

    But setting rebound to get a similar rate of springback from both ends like in the vid has certainly made my SV feel more composed/planted over bumpier sections of rode.

  9. #9
    Join Date
    30th March 2004 - 11:00
    Bike
    2001 RC46
    Location
    Norfshaw
    Posts
    10,455
    Blog Entries
    17
    I'd have to really fuck up the settings on the Elka to get it to feel as bad as my oversprung and underdamped forks.
    ... and that's what I think.

    Or summat.


    Or maybe not...

    Dunno really....


  10. #10
    Join Date
    7th January 2005 - 09:47
    Bike
    .
    Location
    .
    Posts
    2,098
    Quote Originally Posted by 3umph View Post
    so you only have 18mm drop when you sit on it???
    Correct. Looks like I will have to either organise a jack or get some help to extend the forks fully.

    Interestingly this site http://www.racetech.com has a calculator that informs me the fork springs are to hard and the shock spring to soft?....go figure!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •